Abstract
CDMA tele-Controller system is designed with a low power consumption 8 bit microcontroller, ATmega 2560. ATmega 2560 microcontroller consists of 4 UART (Universal asynchronous receiver/transmitter) ports, 4 kbytes EEPROM, 256 kbytes flash memory, 4 kbytes SRAM. 4 URAT is used for CDMA modem, communication for GPS module, EEPROM is used for saving a configuration for program running, a flash memory of 256 kbytes is used for storing a F/W(Firm Ware), and SRAM is used for stack, storing memory of global variables while program running. We have tested the communication distance between the coast station and sea by the fabricated control board using 800 MHz CDMA modem and GPS module, which is building for the navigational aid management system by remote control. As a results, the receiving signal strength is above -80 dBm, and then the characteristics of the control board implemented more than 10 km in the distance of the communication.
DMA 무선원격 제어시스템은 저전력의 8 bit 마이크로콘트롤러인 ATmega 2560으로 설계하였으며, 마이크로콘트롤러는 CDMA 모뎀과 GPS 모듈 등을 시리얼 인터페이스를 하기 위한 4개의 UART 포트가 갖추어져 있으며, 내부에 4K 바이트의 프로그램 매개변수나 프로그램이 동작하는데 필요한 데이터를 저장할 수 있는 메모리(EEPROM)와 256K 바이트의 플래시 메모리 및 프로그램이 실행되는 내부 메모리(SRAM)로 구성되어 있다. 제작되어진 800 MHz CDMA 모뎀과 GPS를 사용한 항로표지 원격관리 시스템의 해상통신 거리를 측정한 결과 10 km 정도의 통신 거리를 확인할 수 있어서며, -80 dBm의 수신신호감도를 나타내었다.