Abstract
Two kinds of welding methods were carried out for 22APU stainless steel, one is a Laser welding and the other is the TIG welding. In this case, difference of corrosion characteristics of welded zone with two welding methods mentioned above was investigated with electrochemical methods such as measurement of corrosion potential, polarization curves and cyclic voltammogram etc.. Vickers hardness of all welded zone (WM:Weld Metal, HAZ:Heat Affected Zone, BM:Base Metal)in the case of Laser welding showed a relatively higher value than those of TIG welding. Futhermore their corrosion current density in all welding zone were also observed with a lower value compared to TIG welding. In particular corrosion current density of BM regardless of welding method indicated the lowest value than those of other welding zone. Intergranular corrosion was not observed at the corroded surface of all welding zone in the case of Laser welding, however it was observed at WM and HAZ with TIG welding, which is suggested that chromiun depletion due to forming of chromium carbide appears to WM and HAZ which is in the range of sensitization temperature. Therefore their zone can easily be corroded with more active anode. Consequently we can see that corrosion resistance of all welding zone of 22APU stainless steel can apparently be improved by using of Laser welding.
22APU 스테인리스강에 대해서 두가지의 용접법이 적용 되었으며, 그중 한 방법은 레이저 용접법이며 다른 하나는 TIG 용접법이다. 이 경우 상기한 두 용접을 적용할 경우 용접부의 부식특성의 차이점에 대해서 전기화학적인 방법 예를 들면 부식전위, 분극곡선 및 사이클릭볼타모그램 등의 측정에 의해서 고찰되어졌다. 레이저용접의 경우 모든 용접부(용접금속,열영향부, 모재부)의 경도가 TIG용접의 경우에 비해서 상대적으로 높은 값을 나타내었다. 더욱이 모든 용접부의 부식전류밀도 역시 TIG용접에 비해서 낮은 값이 관찰되었다. 특히 모재부의 부식전류밀도는 용접방법에 관계없이 가장 낮은 값을 나타내었다. 그리고 레이저용접의 경우 부식된 모든 용접부에서 입계부식이 관찰 되지 않았으나, TIG용접에서는 용접금속부와 열영향부에서 입계부식이 관찰되었는데 이것은 크롬카바이드의 형성에 의한 크롬결핍이 감수성온도영역에 있는 용접금속부와 열영향부에 나타났기 때문으로 사료된다. 따라서 이들 영역은 더욱 활성화된 양극으로 부식되기쉽다. 결과적으로 22APU 스테인리스강의 용접부의 내식성은 레이저용접에 의해서 확실히 개선될 수 있다는 사실을 알 수 있다.