초록
중유회를 효율적으로 소각 처리할 수 있는 이동상식 스토카로를 설계, 제작하기 위해 중유회가 노상을 이동하면서 겪는 조건들을 회분식 노에서 모사(模寫)하여 열중량분석법으로 중유회의 소각실험을 수행하였다. 이 결과로부터 이동상식 스토카로의 운전조건 및 노상면적 등을 구하였다. 중유회의 연소과정은 연소속도 차이에 의해 3단계로 구별되며, 각 단계별로 효과적인 연소가 이루어질 수 있도록 해야 한다. 비산방지 및 체적감소를 위하여 소각 전 첨가되는 수분 함량은 20 wt.%가 적절하였다. 중유회의 연소속도는 산소농도에 크게 의존하므로, 소각로는 연소공기의 조절 기능이 필요하다. 저융점 금속화합물의 용착 및 증발을 방지하고, 소각잔사의 불용화 및 유가금속 회수를 위해 소각온도는 $750^{\circ}C{\sim}800^{\circ}C$가 적절하고, 중유회의 균일한 연소반응과 연소속도의 향상을 위해 소각 중 중유회의 교반이 요구된다. 최적 조건에서 단위면적당 소각속도는 $12.53kg/m^{2}hr$이며 1일 18 ton의 중유회를 소각처리하기 위해서는 $60m^2$의 노상면적이 필요하다.
To design and construct a moving bed stoker incinerator for incineration treatment of the domestic oil fly ash, operating condition and moving bed area of incinerator were determined by performing incinerate experiment of the oil fly ash in the muffle furnace which simulates moving bed stoker incinerator in all conditions. Incineration process of the oil fly ash could be divided into 3 stages, every stage needs the appropriate operating condition for effective incineration. The optimum content of water in the heavy oil fly ash was found to be 20 wt% to prevent the ash from flying and reduce the volume. Science combustion rate of oil fly ash depends on the oxygen content, the incinerator must have a equipment to control the oxygen content in the combustion air. The optimum temperature was $750{\sim}800^{\circ}C$ in order to prevent adhesion to the stocker and evaporation of metal compounds of low melting point. Uniform combustion reaction and acceleration of combustion rate required agitation during the combustion of oil fly ash. The incineration rate was $12.53kg/m^2hr$ and the working area of moving bed incinerator was found to be $60m^2$ to incinerate 18 tons of oil fly ash per day.