초록
본 논문에서는 혼합소스(mixed-source) HVPE(hydride vapor phase epitaxy)방법으로 선택성장(SAC: selective area growth) GaN/AlGaN 이종접합구조의 발광다이오드를 r-plane 사파이어 기판 위에 제작하였다. SAG-GaN/AlGaN DH(double heterostructure)는 고온 GaN 버퍼층, Te 도핑된 AlGaN n-클래딩층. Gan 활성층. Mg 도핑된 AlGaN p-클래딩층. Mg 도핑된 GaN p-캡층으로 구성되어있다. GaN/AlGaN 이종접합구조의 발광다이오드의 특성을 알아보기 위해 SEM을 통한 구조적 분석과 전류-전압 측정(I-V: current-voltage measurement), 전류-광출력(EL: electroluminescence) 측정을 통하여 전기적, 광학적 특성을 평가하였다.
In this paper, a selective area growth (SAG) of a GaN/AlGaN double heterostructure (DH) has been performed on r-plane sapphire substrate by using the mixed-source hydride vapor phase epitaxy (HVPE) with multi-sliding boat system. The SAG-GaN/AlGaN DH consists of GaN buffer layer, Te-doped AlGaN n-cladding layer, GaN active layer, Mg-doped AlGaN p-cladding layer, and Mg-doped GaN p-capping layer. The electroluminescence (EL) characteristics show an emission peak of wavelength, 439 nm with a full width at half maximum (FWHM) of approximately 0.64 eV at 20 mA. The I-V measurements show that the turn-on voltage of the SAG-GaN/AlGaN DH is 3.4 V at room temperature. We found that the mixed-source HVPE method with a multi-sliding boat system was one of promising growth methods for III-Nitride LEDs.