Flowability and Strength Properties of High Flowing Self-Compacting Concrete with Steel Fiber Reinforced

강섬유가 혼입된 고유동 자기충전 콘크리트의 유동 및 강도 특성

  • 최연왕 (세명대학교 토목공학과) ;
  • 최욱 (한국시설안전공단 네트워크연구단) ;
  • 정재권 (세명대학교 토목공학과) ;
  • 안태호 (세명대학교 토목공학과)
  • Received : 2008.08.29
  • Accepted : 2008.10.31
  • Published : 2009.01.30

Abstract

In this study, the concrete, in which the steel fiber(SF) with different volume-surface ratios and lengths was intermixed in High flowing Self-Compacting Concrete(HSCC), was produced to compare with steel fiber reinforced concrete as a part of plan to improve the workability and the quality of steel fiber reinforced concrete. As the result of experiment, the flowing and passing characteristics of HSCC intermixed with SF was highly improved as there was no fiber ball phenomenon due to the effect of high flowability and the viscosity, and in the identical range of compressive strength, it showed the tendency that the splitting and flexural strength was increasing as the length was getting longer regardless of volume-surface ratio when compared with HSCC which was intermixed with SF. It is estimated that in case of application of HSCC intermixed with steel fiber to work sites, it would be possible to improve the workability and the quality which would be better than that of steel fiber reinforced concrete which has been used.

본 연구에서는 강섬유보강 콘크리트의 시공성 및 품질향상 방안의 일환으로 고유동 자기충전 콘크리트(HSCC)에 형상비 및 길이를 달리한 강섬유(SF)를 혼입한 콘크리트를 제조하여 강섬유보강 일반콘크리트(CC)와 유동 및 강도 특성을 비교 검토하였다. 실험결과 SF를 혼입한 HSCC는 높은 유동성 및 점성의 영향으로 SF 자체의 뭉침현상이 발생하지 않아 강섬유보강 CC의 경우보다 유동성능 및 통과성능이 크게 향상 되었으며, 동일한 압축강도 범위에서 SF를 혼입하지 않은 HSCC의 경우보다 쪼갬 및 휨강도는 SF의 형상비와 관계없이 길이가 길어질수록 증가하는 경향이 나타났다. 이상의 실험결과를 통하여 강섬유를 혼입한 HSCC를 현장 적용할 경우 기존에 사용되고 있는 강섬유보강 CC의 경우보다 시공성 및 품질 향상이 가능할 것으로 판단된다.

Keywords

References

  1. 고경택, 강수태, 박정준, 류금성, "고강도 강섬유 보강 시멘트 복합체의 워커빌리티 향상에 관한 연구", 한국구조물진단학회 제8권 제3호, 2004. 7. pp. 141-148
  2. Mustafa Sahmaran, Alperen Yurtseven, I. Ozgur Yaman, "Workability of hybrid fiber reinforced self-compacting concrete," Building and Environment, Vol. 40, Issue 12, 2005, pp. 1672-1677 https://doi.org/10.1016/j.buildenv.2004.12.014
  3. 高流動 ユソクリトー施工指針, JSCE, 2000, pp. 40-45
  4. ASTM C 1621, "Standard Test Method for Pssing Ability of Self-Consolidating Concrete by J-Ring"
  5. Nan Su, Buquan Miao, "A new method for the mix design of medium strength flowing concrete with low cement content," Cement and Concrete Composite, Vol. 25, Issue 2, 2003, pp. 215-222 https://doi.org/10.1016/S0958-9465(02)00013-6
  6. Nan Su, Kung-Chung Hsu, His-Wen Chai, "A simple mix design method for self-compacting concrete," Cement and Concrete Research, Vol. 31, Issue 12, 2001, pp. 1799-1807 https://doi.org/10.1016/S0008-8846(01)00566-X
  7. Yun Wang Choi, Yong Jic Kim, Hwa Cheol Shin, Han Young Moon, "An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete, " Cement and Concrete Research, Vol. 36, Issue 9, 2006, pp. 1595-1602 https://doi.org/10.1016/j.cemconres.2004.11.003
  8. ASTM C 1611, "Standard Test Method for Slump Flow of Self-Consolidating Concrete". 2007