Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Characteristics of Peak External Pressure Acting on the Roof and Wall of the Low-Rise Buildings with Gable Roofs

박공지붕형 저층건축물의 지붕 및 벽면에 작용하는 피크외압의 분포 특성

  • 조원근 (금오공과대학교 건축공학과) ;
  • 원종호 (금오공과대학교 건축공학과) ;
  • 하영철 (금오공과대학교 건축공학과)
  • Received : 2009.03.11
  • Accepted : 2009.05.29
  • Published : 2009.06.27
Download PDF
⟨ Previous Next ⟩

Abstract

The low-rise buildings with gable roofs are commonly used in a number of industries. In order to study the characteristics of peak external pressure coefficient on low-rise buildings with gable roofs, wind-tunnel test have been carried out. Wind-induced pressures were measured simultaneously at many points on wind-pressure models, typical of simple low-rise buildings with gable roofs, which have seven different roof slope with constant width(D), height(H), and length(D). The pressure measurements were made in one kind of turbulent boundary layer, which simulated the natural winds over typical suburban terrains at a geometric scale of 1/150. The results indicate that peak external pressure coefficient on the roof and wall edges were increased. The results compared with wind standard of KBC-2005 and standards of various nations. The comparative resultant, experimental result appeared very similar at AIJ-2004. But the results were somewhat larger then wind standard of KBC-2005.

산업용 건축물은 일반적으로 박공지붕형 저층의 형태로 많이 건설된다. 본 연구는 박공지붕형 저층건물의 풍압분포와 특성을 알아보기 위하여 풍동실험을 수행하였다. 풍동실험은 경사각 변화에 따른 외장재용 피크외압계수 분포양상을 알아보기 위하여 동일한 폭과 높이, 길이를 가지지만 지붕 경사각이 서로 다른 7가지의 모형을 제작하여 실험하였다. 실험결과 지붕과 벽면의 모서리 부분에서 최대 피크외압계수가 나타났으며, 이를 KBC-2005 및 각국의 기준과 비교하여 보았다. 실험에 의한 피크외압계수는 AIJ-2004와 매우 유사하게 나타났지만 KBC -2005보다는 다소 크게 나타났다.

Keywords

References

  1. 하영철, 이은지, 황성권, 김동우(2008) 고층건축물의 풍상면 및 풍하면 평균풍압의 연직분포 특성, 대한건축학회논문집 구조계, 대한건축학회, 제24권 제3호, pp. 35-42
  2. 하영철, 이은지, 황성권, 길용식(2008) 풍향에 따른 고층건축물의 연직방향 평균풍압의 연직분포 특성, 대한건축학회논문집 구조계, 대한건축학회, 제24권 제9호, pp. 55-62
  3. 대한건축학회(2005) 건설교통부고시 건축구조설계기준, 기문당
  4. 日本建築學會(2004) 建築物 荷重指針 · 同解說
  5. American Society of Civil Engineers(2006) ASCE Standard ASCE/SEI 7-05, Minimum Design Loads for Buildings and Other Structures
  6. Davenport, A. G., Surry, D., and Stathopoulos, T.(1977) Wind loads on low-rise buildings., Final Report on Phases Ⅲ, BLWT-SS8, University of Western ontario, London, Ontario, Canada
  7. Davenport, A. G., Surry, D., and Stathopoulos, T. (1978) Wind loads on low-rise buildings., Final Report on Phases Ⅰ and Ⅱ, BLWT-SS8, University of Western ontario, London, Ontario, Canada
  8. National Research Council Canada(2006) User's Guide-NBC 2005; Structural Commentaries (Part 4 of Division B)
  9. R.J. Kind(1986) Worst suctions near edges of flat rooftop on low-rise buildings, Journal of Wind Engineering and Industrial Aerodynamics 25 31-47 https://doi.org/10.1016/0167-6105(86)90103-0
  10. Emil Simiu, Robert H.Scanlan(1996) Wind effects on structures : Thrird Edition, A Wiley-Interscience Publication
  11. John K. Holmes(2001) Wind loading of structures, SponPress
  12. P.C. Case, N. Isyumov(1998) Wind loads on low buildings with 4 : 12 gable roofs in open country and suburban exposures, Journal of Wind Engineering and Industrial Aerodynamics 77&78 107-118 https://doi.org/10.1016/S0167-6105(98)00136-6
  13. Yasushi Uematus, Nicholas Isyumov(1997) Wind Pressure Acting on the Roof and Wall Edges of a Low-Rise Building ; Part 1 Characteristics of Pressure Distributions, Japen of Wind Engineering No. 70 3-14
  14. Yasushi Uematus, Nicholas Isyumov(1997) Wind Pressure Acting on the Roof and Wall Edges of a Low-Rise Building ; Part 2 Statistical Properties of Fluctuating Pressures, Japen of Wind Engineering No. 72 11-19
  15. Yasushi Uematus, Nicholas Isyumov(1997) Wind Pressure Acting on the Roof and Wall Edges of a Low-Rise Building ; Part 3 External Pressure Coefficients for Cladding Design, Japen of Wind Engineering No. 73 15-24
  16. Yasushi Uematus, Nicholas Isyumov(1998) Peak gust pressures acting on the roof and wall edges of a low-rise building, Journal of Wind Engineering and Industrial Aerodynamics 77&78 217-231 https://doi.org/10.1016/S0167-6105(98)00145-7