초록
이 논문은 주어진 설계 조건과 제한 조건하에서 2족 보행로봇을 설계하고 제작하는 과정을 제시하며, GCSE의 상호작용 설계과정 모형에 근거하였다. 2족 보행 로봇은 보행하는데 총 5개의 관절을 사용하여 이동한다. 양쪽 발목, 양쪽 무릎 관절에 각각 하나씩의 자유도를 갖고 골반 부분에 한 개의 자유도를 갖는 구조이며, 제작된 로봇은 회전운동만으로 움직이는 5자유도를 갖는 2족 보행로봇이다. 보행 로봇은 구동을 제어하는 마이크로컨트롤러 보드와 직접 구동을 수행하는 모터로 구성된다. 제작된 로봇은 두발로 걷는 로봇인 만큼 안정적인 보행 동작의 시현과 주변 물체를 탐색하고 인식하여 특정한 동작을 수행하는 것을 최종 목표로 하였다. 제작된 보행로봇을 주어진 4가지 모드에 따라 구동하였는데, 성공적으로 동작하였다. 설계 및 제작과정을 통하여 여러 기술을 통합적으로 생각하고 종합적으로 접근하는 방법을 배울 수 있었다.
The objective of the paper is to design and produce a walking robot such as humanoid robot under the given design requirements and constraints. An approach to design and produce walking robot with 2 legs was suggested. It is walking robot of 5 joints which have both of ankles, both of knee joint, and pelvis. It has 5 degrees of freedom and moves by only rotations. We review the key points before the design of the walking robot. The walking robot is consisted of 2 portions : motor and frame, control board. Final goal is to walk stably and if it detects and cognizes a special object, the walking robot avoids it and moves in other direction. The walking robot was made according to design procedures and tested by proposed algorithms. The running test was successful under given 4 modes. The findings of this research could think kinds of technologies concurrently and approach synthetically through process of design and production.