초록
Ad hoc 네트워크는 데이터 발신과 라우터 역할을 동시에 수행할 수 있는 노드들로 구성되며 특정한 네트워크 기반 구조의 지원 없이도 동작할 수 있는 장점을 지니고 있다. Ad hoc 네트워크에서는 무선 네트워크 상의 전체 전송영역에서 높은 처리율과 낮은 지연시간을 반드시 제공할 수 있어야 한다. 최근 들어 빔 생성(beam-forming) 방식이나 멀티플렉싱 방식의 다중안테나 (MIMO)를 이용하여 높은 처리율과 낮은 지연시간을 제공하기 위한 새로운 연구가 수행된 바 있으며, 이러한 연구 결과에 의해 송 수신자들이 서로간에 심각한 간섭을 일으키지 않는다면 다수의 송 수신자가 안테나의 지향성 빔을 이용하여 통신을 위한 공간 재사용 가능성을 높일 수 있음을 검증한바 있다. 그러나 Ad hoc 네트워크에서 노드 밀도가 증가하면 지향성 안테나의 성능은 무지향성 안테나의 성능과 유사하게 된다. 본 연구에서는 QualNet을 이용한 시뮬레이션을 통해 Ad hoc 네트워크 내의 노드 수가 크게 증가하면 지향성 안테나의 평균 처리량과 패킷 에러율이 무지향성 안테나의 성능에 점진적으로 근접한다는 사실을 증명하였으며, 무선네트워크에서 지향성 안테나 성능 개선을 위해 비중 있게 다루어야 할 중요 이슈들에 대해 자세히 기술하였다.
Ad hoc wireless networks operate without any infrastructure where a node can be a source and a router at the same time. This indispensably requires high throughput and low delay performance throughout the wireless network coverage span, particularly under heavy traffic conditions. Recent research on using multiple antennas in beam-forming or multiplexing modes over a wireless channel has shown promising results in terms of high throughput and low delay. Directional antennas have shown to increase spatial reuse by allowing multiple transmitters and receivers to communicate using. directional beams as long as they do not significantly interfere with each other. However directional antenna performance asymptotically approaches the omni-directional performance in a high density ad hoc network. Simulation results in QualNet validate that average throughput and packet corruption ratio of directional antenna approach omni-directional performance. Moreover, we further highlight some important issues pertaining to the directional antenna performance in wireless networks.