DOI QR코드

DOI QR Code

Hysteresis Characteristics of a SFCL using a Magnetic Coupling of Coils with an Iron Core of Two Magnetic Paths

두 개의 자기경로 철심을 갖는 코일의 자기결합을 이용한 초전도 전류제한기의 히스테리시스 특성

  • 임성훈 (숭실대학교 전기공학부)
  • Published : 2009.12.01

Abstract

The iron core, which comprises the superconducting fault current limiter (SFCL) using magnetic coupling of coils, can be operated in the saturation region, especially at the initial fault period. This operation of the iron core in the saturation region deteriorates the fault current limiting operation of the SFCL. To solve the saturation problem of the SFCL using magnetic coupling of coils, the iron core with two magnetic paths, which has an air-gap in one of them, was adopted. In this paper, the hysteresis characteristics of SFCL using magnetic coupling of coils, which were wound in the iron core with two magnetic paths, were analyzed. Through comparative analysis on the hysteresis characteristics of the iron core comprising SFCL, the hysteresis characteristics of the iron core with two magnetic paths were confirmed to be kept in the non-saturation region during the fault period and thus, the effective fault current limiting operation of the SFCL using the magnetic coupling of coils could be performed.

Keywords

References

  1. K.-B. Park, J.-S. Kang, B.-W. Lee, I.-S. Oh, H.-S. Choi, H.-R. Kim, and O.-B. Hyun, 'Quench behavior of YBaCuO films for fault current limiters under magnetic field', IEEE Trans. Appl. Supercond., Vol. 13, No. 2, p. 2092, 2003 https://doi.org/10.1109/TASC.2003.812988
  2. O.-B. Hyun, S.-D. Cha, H.-R. Kim, H.-S. Choi, and S.-D. Hwang, 'Shunt-assisted simultaneous quenches in series-connected resistive SFCL components', IEEE Trans. Appl. Supercond., Vol. 13, No. 2, p. 2060, 2003 https://doi.org/10.1109/TASC.2003.812986
  3. J.-W. Sim, Y.-S. Choi, H.-R. Kim, and O.-B. Hyun, 'Equal current distribution in parallel circuits of resistive superconducting fault current limiters using multiple super- conducting inter-phase transformers', IEEE Trans. Appl. Supercond., Vol. 13, No. 2, p. 2092, 2003 https://doi.org/10.1109/TASC.2003.812988
  4. S.-H. Lim, H.-S. Choi, D.-C. Chung, S.-C. Ko, and B.-S. Han, 'Impedance variation of a flux-lock type SFCL dependent on winding direction between coil 1 and coil 2', IEEE Trans. Appl. Supercond., Vol. 15, No. 2, p. 2039, 2005 https://doi.org/10.1109/TASC.2005.849446
  5. S.-H. Lim, H.-S. Choi, and B.-S. Han, 'Fault current limiting characteristics due to winding direction between coil 1 and coil 2 in a flux-lock type SFCL', Physica C, Vol. 416, p. 34, 2004 https://doi.org/10.1016/j.physc.2004.08.019
  6. S.-H. Lim, 'Operational characteristics of a flux-lock type SFCL with series connection of two coils', IEEE Trans. Appl. Supercond., Vol. 17, No. 2, p. 1895, 2007 https://doi.org/10.1109/TASC.2007.899869
  7. S.-H. Lim, J.-F. Moon, and J.-C. Kim, 'Current limiting and recovery characteristics of SFCLs using magnetic coupling of two coils', IEEE Trans. Appl. Supercond., Vol. 19, No. 3, p. 1900, 2009 https://doi.org/10.1109/TASC.2009.2017710
  8. M.-S. Joo and T.-K. Ko, 'Novel design and operational characteristics of inductive high- TC superconducting fault current limiter', IEEE Trans. Appl. Supercond., Vol. 7, No. 2, p. 1005, 1997 https://doi.org/10.1109/77.614677
  9. S.-H. Lim, H.-S. Choi, and B.-S. Han, 'The improved hysteresis characteristics of flux- lock type SFCL using third winding', Physica C, Vol. 406, p. 37, 2004 https://doi.org/10.1016/j.physc.2004.02.177