압력용기 매니폴드 밸브의 구조최적설계

Structural Optimization of a Manifold Valve for Pressure Vessel

  • 배태성 (동아대학교 대학원 기계공학과) ;
  • 김시범 (동아대학교 기계공학과) ;
  • 이권희 (동아대학교 기계공학과)
  • Bae, Tae-Sung (Department of Mechanical Engineering, Donga Univ.) ;
  • Kim, Si-Pom (Department of Mechanical Engineering, Donga Univ.) ;
  • Lee, Kwon-Hee (Department of Mechanical Engineering, Donga Univ.)
  • 발행 : 2009.12.01

초록

This study proposes the structural optimization of a manifold valve. FE analysis is performed to evaluate the strength of a manifold valve. In addition, the structural optimization technique is applied to reduce its weight. In this study, the optimization method using the kriging interpolation method is adopted to obtain the minimum weight satisfying the strength constraint. The maximum stress and the weight are replaced by the metamodels. In this process, tile sample points are generated by latin-hypercube design. Optimum designs are obtained by ANSYS Workbench and the in-house program.

키워드

참고문헌

  1. Kim, Y. C., "Industrial valve and global standard," Korean Fluid Machinery Association, Vol. 11, No.4, pp. 63-68, 2008 https://doi.org/10.5293/KFMA.2008.11.4.063
  2. Skousen, L. P., "Valve handbook," Elsevier, 2006
  3. MSC Software Corporation, "MSC NAST-RAN 2004 design sensitivity and optimization user's guide," pp . 123-124,2004
  4. VR & D, "GENESIS ver.6.0 user's manual," 2000
  5. Guinta, A. and Watson, L., "A comparison of approximation modeling techniques: polynomial versus interpolating models," Proceedings of the 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Vol. 2, pp. 392-440, 1998
  6. Kang, J., Lee, J. M., Kang, J. H., Park, Y. C. and Park, H. C., "Optimization of a gate valve using orthogonal array and kriging model," Journal of the Korean Society for Precision Engineering, Vol. 23, No.8, pp. 119-126, 2006
  7. Fang, K.-T., Li, R. and Sudjianto, A., "Design and modeling for computer experiments," Chapman & Hall/CRC, 2006
  8. Song. B. C., Park, Y. C., Kang, S. W. and Lee, K. H., "Structural optimization of an upper control arm, considering the strength," Journal of Automobile Engineering, Vol. 223, No.6, pp. 727-735, 2009 https://doi.org/10.1243/09544070JAUTO1090
  9. Leary. S. J., Bhaskar. A. and Keane. A. J., "A derivative based surrogate model for approximating and optimizing the output of an expensive computer simulations," Journal of Global Optimization, Vol. 30, No.1, pp. 39-58, 2004
  10. Lee, K. H. and Kang, D. H., "Structural optimization of an automotive door using the kriging interpolation method," Journal of Automobile Engineering, Vol. 221, No. 12, pp. 1525-1534,2007 https://doi.org/10.1243/09544070JAUTO403
  11. ANSYS, Inc., "ANSYS Workbench-simulation introduction release 10.0," 2006