참고문헌
- J. W. Choi, D. S. Kwag, J. H. Choi, H. J. Kim, J. W. Cho and S. H. Kim, "Electrical insulation design of a 154 kV-class HTS power cable," KIASC Journal, vol. 11, no. 2, pp. 25-28, 2009
- J. H. Choi, D. S. Kwag, H. G. Cheon, C. H. Min, H. J. Kim, K. C. Seong and S. H. Kim, "Electrical insulating design of 600kJ conduction cooled HTS SMES," KIASC Journal, vol. 9, no. 2, pp. 27-30, 2007
- J. Ekin, M. Gouge, "Requirements for 2G wire in practical applications", DOE 2007 Wire Development Workshop, 2007
-
C. Park, D. P. Norton, J. D. Budai, D. K. Christen, D. Verebelyi, R. Feenstra, D. F. Lee, A. Goyal, D. M. Kroeger and M. Paranthaman, "Bend strain tolerance of critical currents for
$YBa_{2}Cu_{3}O_{7}$ films deposited on rolled-textured (001)Ni," Appl. Phys. Lett., vol. 73, no. 13, pp. 1904-1906, Sept. 1998 https://doi.org/10.1063/1.122321 - S. Ochiai, N. Miyazaki, D. Doko, T. Nagai, M. Nakamura, H. Okuda, S. S. Oh, M. Hojo, M. Tanaka and K. Osamura, “Damage evolution under bending and tensile stress and its influence on critical current of Bi2223/Ag superconducting composite tape,” J. Nuclear Mater., 329-333, pp. 1585-1589, 2004 https://doi.org/10.1016/j.jnucmat.2004.04.165
- J. K. F. Yau, N. Savvides and C.C. Sorrell, "Influence of mechanical strain on critical current density and microstructure of silver-sheathed Bi(Pb)2223 superconducting tapes," Physica C, vol. 266, pp. 223-229, 1996 https://doi.org/10.1016/0921-4534(96)00327-9
- N. Cheggour, J. W. Ekin, C. L. H. Thieme, Y. Y. Xie, V. Selvamanickam and R. Feenstra, "Reversible axial-strain effect in Y-Ba-Cu-O coated conductors," Supercond. Sci. Tech., vol. 18, no. 12, pp. S319-S324, 2005 https://doi.org/10.1088/0953-2048/18/12/016
- H. S. Shin, J. R. C. Dizon, R. Bonifacio, T. H. Kim, H. S. Ha, H. S, Kim and S. S. Oh, "Bending strain effects on the critical current in Cu-stabilized IBAD/EDDC processed SmBCO coated conductor tape," Physica C, vol. 468, pp. 1702-1705, 2008 https://doi.org/10.1016/j.physc.2008.05.238
- H. S. Shin, S. S. Oh and D. W. Ha, "Degradation behavior of critical current in Bi-2223 tapes in bending-tension mode," Physica C, vol. 412-414, pp. 1107-1113, 2004 https://doi.org/10.1016/j.physc.2004.02.212
- T. Kuroda, K. Katagiri, H. S. Shin, K. Itoh, H. Kumakura and H. Wada, "Influence of test methods on critical current degradation of Bi-2223/Ag superconductor tapes by bending strain," Supercond. Sci. Tech., vol. 18, no. 12, pp. S383-S389, 2005 https://doi.org/10.1088/0953-2048/18/12/027
- H. S. Shin, J. R. C. Dizon, R. Bonifacio, and J. S. Park, "Influence of bending strain on Ic degradation behavior in YBCO coated conductor tapes processed using RABiTS/MOD," KIASC Journal, vol. 9, no.2, pp. 11-14, 2007
- M. Sugano, K. Osamura, W. Prusseit, R. Sernerad, K. Itoh and T. Kiyoshi, "Tensile fracture behavior of RE-123 coated conductors induced by discontinuous yielding in hastelloy C-276 substrate," Supercond. Sci. Tech., vol. 18, no. 12, pp. S383-S389, 2005 https://doi.org/10.1088/0953-2048/18/12/020
- J. R. C. Dizon, H. S. Shin, R. K. Ko, Dong Wo Ha and S. S. Oh, "Estimation of residual stress in ReBCO coated conductor tapes using various methods," KIASC Journal, vol. 10, no. 4, pp. 9-12, 2007
- N. Sakai, T. Miyamoto, S. J. See, S. Nariki and M. Murakami, "Effect of silver addition on mechanical properties of melt-processed Sm-Ba-Cu-O bulk superconductor," Journal of Low Temperature Physics, vol. 117, nos. 3/4, pp. 981-985, 1999 https://doi.org/10.1023/A:1022579630411