Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

LARGE SCALE FINITE ELEMENT THERMAL ANALYSIS OF THE BOLTS OF A FRENCH PWR CORE INTERNAL BAFFLE STRUCTURE

  • Published : 2009.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The internal core baffle structure of a French Pressurized Water Reactor (PWR) consists of a collection of baffles and formers that are attached to the barrel. The connections are done thanks to a large number of bolts (about 1500). After inspection, some of the bolts have been found cracked. This has been attributed to the Irradiation Assisted Stress Corrosion Cracking (IASCC). The $Electricit\acute{e}$ De France (EDF) has set up a research program to gain better knowledge of the temperature distribution, which may affect the bolts and the whole structure. The temperature distribution in the structure was calculated thanks to the thermal code SYRTHES that used a finite element approach. The heat transfer between the by-pass flow inside the cavities of the core baffle and the structure was accounted for thanks to a strong thermal coupling between the thermal code SYRTHES and the CFD code named Code_Saturne. The results for the CP0 plant design show that both the high temperature and strong temperature gradients could potentially induce mechanical stresses. The CPY design, where each bolt is individually cooled, had led to a reduction of temperatures inside the structures. A new parallel version of SYRTHES, for calculations on very large meshes and based on MPI, has been developed. A demonstration test on the complete structure that has led to about 1.1 billion linear tetraedra has been calculated on 2048 processors of the EDF Blue Gene computer.

Keywords

References

  1. C. POKOR, Y. THEBAULT, C. PUJOL, E. LEMAIRE, N. LIGNEAU “Metallurgical Examination Update of Baffle Bolts Removed from Operating French PWR” Proc. of the International Symposium Fontevraud VI, SFEN, 2006
  2. C. PENIGUEL, I. RUPP, N. LIGNEAU, M. TOMMYMARTIN, L. BELOEIL, E. LEMAIRE ” Thermal Analysis of a PWR core internal baffle structure” - Proceeding PVP 2006, Vancouver, Canada https://doi.org/10.1115/PVP2006-ICPVT-11-93299
  3. Code_Saturne documentation “Code_Saturne 1.4.0 Theory and Programmer’s Guide” http://www.code-saturne.org
  4. F. ARCHAMBEAU et al, “Qualification of Code_Saturne for thermal hydraulics Single Phase Nuclear Applications”. – Super Computing Nuclear Applications Conference, Paris, France 2003
  5. J.H. FERZIGER, M. PERIC, “Computational Methods for Fluid Flow Dynamics”. Springer, third Edition (2002)
  6. C.M. RHIE, W.L. CHOW, “A numerical study of a turbulent flow past an isolated airfoil with training edge separation”, AIAA paper, 82-0998
  7. I. RUPP and C. PENIGUEL, “Coupling heat conduction radiation and convection in complex geometries”. Int Journal of Numerical Methods in complex geometries, Methods for Heat and fluid Flow Vol. 9, University Press, 1999 https://doi.org/10.1108/09615539910260112
  8. C. PENIGUEL, I. RUPP, "Coupling heat conduction, radiation and convection phenomena in complex 2D and 3D geometries", Proceeding Numerical methods in thermal problems, Swansea, 1997
  9. Y.K. LEE, J.C. DAVID, H. CARCREFF “A gamma heating calculation methodology for research reactor” – RRFM 2001 - 5th International topical meeting on research reactor fuel management - p 147-151 – European Nuclear Society, Berne, Switzerland
  10. G. KARYPIS, V. KUMAR “A fast and high quality multilevel scheme for partitioning irregular graphs”, SIAM Journal of Scientific Computing, Vol 20, No. 1, pp. 359-392,1999 https://doi.org/10.1137/S1064827595287997
  11. "MPI : A Message-Passing Interface Standard – Version 2.1" – 2008 - http://www.mpiforum.org/docs/docs.html,http://www.mcs.anl.gov/research/projects