Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Evaluation of Bending Strength in FGM

경사기능재료의 굽힘강도 평가에 관한 연구

  • 송준희 (전북대학교 기계설계공학부) ;
  • 김홍건 (전주대학교 기계자동차공학과)
  • Published : 2009.12.15
Download PDF
⟨ Previous Next ⟩

Abstract

Metal/ceramic composites structures have many attractive properties with great potential for applications that demand high stiffness as well as chemical and biological stability, thermal and electrical insulation. They are currently in use for mechanical and thermal protection in cutting tool and engine parts. Thus, determination of adhesive properties for coating part is one of the most important problems for the extension of the use of coated materials. In this work, bending strength of Functionally Graded Materials(FGM) are evaluated by means of bending strength tester. The graded layer according to the load condition showed the change of the bend strength.

Keywords

References

  1. Chung, Y. L. and Chen, W. T., 2007, "Bending behavior of FGM-coated and FGM-undercoated plates with two simply supported opposite edges and two free edges," Composite Structures, Vol. 81, pp. 157-167.
  2. Niino, A. and Maeda, S., 1990, "Recent development status of functionally gradient materials," ISIJ Int., Vol. 35, pp. 699-703.
  3. Chi, S. H. and Chung, Y. L., 2002, "Cracking in sigmoid functionally graded coating," J Mech., Vol. 18, pp. 41-53.
  4. Bao, G. and Wang, L., 1995, "Multiple cracking in functionally graded ceramic/metal coatings," Int J Solids Struct., Vol. 32, pp. 2853-2871.
  5. Chi, S. H. and Chung, Y. L., 2003, "Cracking in coating-substrate composites of multi-layered and sigmoid FGM coatings," Eng Fract Mech., Vol. 70, pp. 1227-1243.
  6. Jin, Z. H. and Noda, N., 1994, "Crack tip singular fields in nonhomogeneous materials," ASME J. Appl. Mech., Vol. 61, pp. 738-740.
  7. Jin, Z. H. and Paulino, G. H., 2001, "Transient thermal stress analysis of an edge crack in a functionally graded material," Int J. Frac., Vol. 107, pp. 73-98.
  8. Kesler, O., Finot, M., Suresh, S., and Sampath, S., 1997, "Determination of processing induced stresses and properties of layered and graded coatings: experimental method and results for Plasma sprayed $Ni-Al_2O_3$," Acta. Mater., Vol. 45, pp. 3123-3134.
  9. Obata, Y. and Noda, N., 1996, "Optimum material design for functionally gradient material plate," Arch Appl Mech., Vol. 66, pp. 581-589.
  10. Praveen, G. N. and Reddy, J. N., 1998, "Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates," Int J. Solids Struct., Vol. 35, pp. 4457-4476.
  11. Kim, H. G., 2003, "Stress Analysis of a Discontinuous Composite Using Mechanics of Materials Approach," KSMTE, Vol. 12, No. 4, pp. 63-69.
  12. Shaw, M. C., 1998, "The effects of strength probabilistics on the fracture mode of ceramic/metal multilayers," Engineering Fracture Mechanics, Vol. 61, pp. 49-74.
  13. Lee, S. B. and Kim, J. H., 1997, "Finite-element analysis and X-ray measurement of the residual stresses of ceramic/metal joints," Journal of Materials Processing Technology, Vol. 67, pp. 167-172.
  14. Kohnle, C. O. and Schmauder, M. S., 2002, "Elastic and plastic fracture energies of metal/ceramic joints," Computational Materials Science, Vol. 25, pp. 272-277.