Abstract
The results of crack evaluation by conventional UT(Ultrasonic Test)is highly depend on the inspector's experience or knowledge of ultrasound. Phased array UT system and its application methods for small crack length evaluation will be a good alternative method which overcome present UT weakness. This study was aimed at checking the accuracy of crack length evaluation method by electronic scanning and discuss about characteristics of electronic scanning for crack length evaluation. Especially ultrasonic phased array with electronic scan technique was used in carrying out both sizing and detect ability of crack as its length changes. The response of ultrasonic phased array was analyzed to obtain the special method of determining crack length without moving the transducer and detect-ability of crack minimal length and depth from the material. A method of crack length determining by electronic scanning for the small crack is very real method which has it's accuracy and verify the effectiveness of method compared to a conventional crack length determination.
초음파에 의한 결함평가 방법은 결과가 검사자의 경험과 지식에 의존되고 검사자에 따라 평가결과가 달라진다. 위상배열 초음파는 탐촉자 소자에 초음파를 발생하는 시간지연을 부여함으로서 초음파 빔의 집속방향과 위치를 전자적으로 제어할 수 있는 특징이 있으며 탐촉자를 움직이지 않고 결함의 평가가 가능하다. 본 연구에서는 위상배열 초음파의 전자적 스캔 특성을 이용하여 미소결함에 대한 크기평가의 기법에 대한 고찰을 하였다. 일반적으로 탐촉자를 움직여서 결함길이를 평가하는 기존의 방법은 결함의 길이가 아주 미소할 경우는 탐촉자의 이동거리 역시 미소하여 크기를 평가하기가 곤란하다. 따라서 전자적 스캔의 특성을 이용하여 미소결함에 대해서도 결함길이를 정확하게 평가할 수 있는 방법 및 기법에 대하여 고찰하여 그 유효성을 입증하였다.