참고문헌
- G. Liu, Z. Lin, Y. Bao, J. Cao, 2002, Eliminating springback error in U-shape part forming by variable blankholder force, J. Mater. Eng. and Perf., Vol. 11, pp. 64-70 https://doi.org/10.1007/s11665-002-0009-z
- N. Stander, et al., Springback compensation in sheet metal forming using successive response surface method, 2002, American Institute of Aeronautics and Astronautics, Inc
- E. Pairel, et al., 2004, Correction of geometrical defects of stamping parts by numerical simulation and design of experiment, Archive of Civil and Mech. Eng., Vol. 4, pp. 79-89
-
A. Jernberg, 2003, A method for modifying the forming tool geometry in order to compensate for springback effects, 4
$^{TM}$ European LS-DYNA Users Conference, pp.45-54 -
T. Dutton, R. Edwards, A. Blowey, 2005, Tool design for a high strength steel side impact beam with springback compensation, 5
$^{TM}$ European LSDYNA Users Conference - R. Lingbeek, et al. 2005, The development of a finite element based springback compensation tool for sheet metal products, J. Mater. Process Technol., Vol. 169, pp. 115-125 https://doi.org/10.1016/j.jmatprotec.2005.04.027
- G. Yanjin, et al., Influence of material properties on the laser-forming process of sheet metals, J. Mater. Process Technol., 2005, Vol. 167, pp. 124-131 https://doi.org/10.1016/j.jmatprotec.2004.10.003
- Z. Hu, R. Kovacevic, M. Labudovic, 2002, Experiment and numerical modeling of buckling instability of laser sheet forming, J. Machine Tools Manuf., Vol. 42, pp. 1427-1439 https://doi.org/10.1016/S0890-6955(02)00075-5
- H. Shen, et al., 2006, An analytical model for estimating deformation in laser forming, Compu. Mater. Sci., Vol. 37, pp. 593-598 https://doi.org/10.1016/j.commatsci.2005.12.030
- J. Kim, S. J. Na, 2005, Feedback control for 2D free curve laser forming, Optics and Laser Technol., Vol. 37, pp. 139-146 https://doi.org/10.1016/j.optlastec.2004.03.001
- J. Bao, Y. L. Yao, 2001, Analysis and prediction of edge effects in laser bending, J. Manuf. Sci. Eng., Vol.123, pp. 53-61 https://doi.org/10.1115/1.1345729
- P. Zhang, et al., 2007, FE simulation of laser curve bending of sheet metals, J. Mater. Process. Technol., Vol. 184, pp. 157-162 https://doi.org/10.1016/j.jmatprotec.2006.11.017
- M. Geiger, M. Merklein, M. Pitz, 2004, Laser and forming technology - an idea and the way of implementation, Vol. 151, pp. 3-11 https://doi.org/10.1016/j.jmatprotec.2004.04.004
- N. Bianco, et al., 2006, Transient heat conduction in solids irradiated by a moving heat source, Excerpt from the Proceeding of COMSOL Users Conference Milano
- D. J. Majumdar, A. K. Nath, I. Manna, 2004, Studies on laser bending of stainless steel, Mater. Sci. Eng. A, Vol. 385, pp.113-122 https://doi.org/10.1016/j.msea.2004.06.009
-
K. P. Kang, et al., 2008, Prediction of phase transformation of boron steel sheet during hot press forming using material properties modeler and DEFORM
$^{TM}$ -HT, Trans. Mater. Process., Vol. 17, pp. 249-256 https://doi.org/10.5228/KSPP.2008.17.4.249 - Sente Software, 2007, JMatPro Introductory Manual
- J. Goldak, A. Chakravarti, M. Bibby, 1983, A new finite element model for welding heat sources, Metallurgical Trans., Vol. 15B, pp. 299-305 https://doi.org/10.1007/BF02667333
피인용 문헌
- Laser irradiated bending characteristics of the ultra-high strength steel sheets vol.16, pp.1, 2015, https://doi.org/10.1007/s12239-015-0010-9
- Bending Characteristics of DP980 Steel Sheets by the Laser Irradiation vol.21, pp.6, 2012, https://doi.org/10.5228/KSTP.2012.21.6.378
- Numerical and experimental investigation on laser irradiated bending process of advanced high strength steel vol.17, pp.sup2, 2013, https://doi.org/10.1179/1432891713Z.000000000303
- Bending Angle Characteristics of SPFC1180Y Steel by the Laser Irradiation Position vol.481, pp.1662-7482, 2013, https://doi.org/10.4028/www.scientific.net/AMM.481.249