Tribology and Lubricants

  • 제25권5호
  • /
  • Pages.298-304
  • /
  • 2009
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

CFD를 사용한 스팀터빈용 각이 진 패킹 링 실의 누설량 예측

Leakage Analysis of Angled-Labyrinth-Packing-Ring Seal for Steam Turbine Using CFD

  • 하태웅 (경원대학교 기계.자동차공학과) ;
  • 강정현 (경원대학교 기계.자동차공학과)
  • Ha, Tae-Woong (Dept. of Mechanical & Automotive Engineering, Kyungwon University) ;
  • Kang, Jung-Hyun (Dept. of Mechanical & Automotive Engineering, Kyungwon University)
  • 발행 : 2009.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An angled labyrinth seal is used for the diaphragm-packing-ring seal design of steam turbine due to its leakage reduction characteristic. CFD analysis using FLUENT has been performed to predict leakage and determine an optimum slanted angle which yields the best leakage reduction. Results show that the optimum value of slanted angle is $-30^{\circ}$ independent of number of labyrinth teeth, inlet pressure, and tooth height to pitch ratio. 3D CFD analysis has been performed for predicting leakage of the angled labyrinth seal. Comparing with the result of 2D CFD analysis, 3D CFD analysis shows 1.4% smaller.

키워드

참고문헌

  1. Iwatsubo, T., 'Evaluation of Instability Forces of Labyrinth Sea1s in Turbines or Comprεssors', NASA CP 2133 Proceedings of a workshop at Texas A&M University 12-14 May Entitled Rotordynamic lnstability Problems in High Performance Turbomac-hinery, pp. 139-167, 1980
  2. Childs, D. W. and Scharrer, J. K., 'An Iwatsubo Based Solution for Labyrinth Seals: A Comparison to Experimental Results', ASME Trans. J of Engineering for Gas Turbines and Power, Vol. 108, pp.325-331, 1986 https://doi.org/10.1115/1.3239907
  3. Scharrer, J., 'A Comparison of Experimental and Theoretical Results for Labyrinth Gas Seals', Ph. D. Dissertation, Texas A&M University, 1987
  4. 하태웅, 이안성, '압축기용 라비린스 실의 동특성 해석', 한국소음진동공학회지, Vol. 8, No. 5, pp. 849-855, 1998
  5. Ha, T. W., 'Rotordynamic Analysis for Stepped-Labyrinth Gas Seal Using Moody's Friction-Factor Model', KSME International Journal, Vol. 15, No. 9, pp. 1079-1089, 2001 https://doi.org/10.1007/BF03185662
  6. 하태웅, '엇갈린 래버린스 실의 누설량 및 동특성 해석', 윤활학회지, Vol. 18, No. 1, pp. 24-33, 2002
  7. 하태웅, 이용복, 김승종, 김창호, '스팀 터빈용 조합형 엇갈린 래버린스 실의 누설량 및 동특성 해석', 유체기계저널, Vol. 7, No. 6, pp. 45-54, 2002 https://doi.org/10.5293/KFMA.2004.7.6.045
  8. Dietzen, F. J. and Nordmann, R., 'Calculating Rotordynamic Coefficients of Seals by Finite-Differe- nce Techniques, the 4th Workshop on Rotordynamic Instability Problems in High Performance Turbomach-inery., pp. 77-98, 1986
  9. Park, S. Y. and Rhode D., 'CFD Solution Allowing Modeling Improvement to the Bulk Flow Rotordynamic Code of Dr. Childs for Grooved Seals', Texas A&M University, TRC-SEAL -6-98, 1998
  10. Moore, J., Palazzolo, A., and Na U. J., 'CFD Modeling for Dynamic Coefficients of Labyrinth Seals and Impeller Leakage Paths', Texas A&M University, TRC-SEAL-2-98, 1998
  11. 하태웅, 'CFD를 시용한 터보기계 비접촉식 실의 누설량 예측', 유체기게저널, Vol. 9, No. 3, pp. 14-21,2006
  12. 하태웅, 'CFD를 사용한 복잡한 형상을 갖는 래버린스 실의 누설량 예측', 윤활학회지, Vol. 22, No.2, pp. 66-72, 2006
  13. 하태웅, '누설량 저감을 위한 래버린스 실의 설계 개선 및 해석', 윤활학회지, Vol. 23, No. 2, pp. 43-48, 2007
  14. Fluent User's Guide Ver. 6.2