Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Implementation of an Embedded System for an Interaction between Robot Arm and Human Arm Based on Force Control

힘 제어 기반의 로봇 팔과 인간 팔의 상호 작용을 위한 임베디드 시스템 설계

  • 전효원 (LIG 넥스원 연구소) ;
  • 정슬 (충남대학교 메카트로닉스공학과)
  • Published : 2009.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, an embedded system has been designed for force control application to interact between a robot arm and a human operator. Force induced by the human operator is converted to the desired position information for the robot to follow. For smooth operations, the impedance force control algorithm is utilized to represent interaction between the robot and the human operator by filtering the force. To improve the performance of position control of the robot arm, a velocity term has been obtained and tested by several filters. A PD controller for position control has been implemented on an FPGA as well. Experimental studies are conducted with the ROBOKER to test the functionality of the designed hardware.

Keywords

References

  1. M. Raibert and J. J. Craig, 'Hybrid position/force control of manipulators,' ASME Journal, of Dynamic Systems, Measurements, and Control, vol. 102, pp. 126-l33, 1981
  2. N. Hogan, 'Impedance control: an approach to manipulator, part i, ii, iii,' ASME Journal of Dynamics Systems, Measurements, and Control, vol. 3, pp. 1-24,1985
  3. R Anderson and M. W. Spong, 'Hybrid impedance control of robotic manipulators,' IEEE Conference on Robotics and Automations, pp. 1073-1080, 1987
  4. G. J. Liu and A. A. Goldenberg, 'Robust hybrid impedance control of robot manipulators,' Proc. IEEE Conference on Robotics and Automations, pp.287-292, 1991
  5. S. Jung and T. C. Hsia, 'Adaptive force tracking impedance force control of robot for cutting process,' IEEE Conference on Robotics and Automations, pp. 1800-1805, 1999
  6. S. Jung, T. C. Hsia, and R G. Bonitz, 'Force tracking impedance control for robot manipulators with an unknown environment: Theory, simulation, and experiment,' Journal of Robotics Research, vol. 29, no. 9, pp. 765-774, 2001
  7. S. S. Kim and S. Jung, 'Hardware implementation of a neural network controller with an MCU and am FPGA for nonlinear systems,' International Journal of Control, Automation, and Systems Engineering, vol. 4, no. 5, pp. 567-574, 2006
  8. S. Jung and S. S. Kim, 'Hardware implementation of a real-time neural network controller with a DSP and an FPGA for nonlinear systems,' IEEE Transaction on Industrial Electronics, vol. 4, no. 5, pp. 265-271, 2007
  9. J. S. Kim, H. W. Jeon, and S. Jung, 'ROBOKER 팔의 FPGA 기반 비선형 제어기의 임베디드 하드웨어 구현,' 제어.자동화.시스템공학 논문지, vol. 13. no. 12. pp. 1153-1159, Dec. 2007
  10. H. W. Jeon and S. Jung, 'Embedded design of position based impedance force control for implementing interaction between a human and a ROBOKER,' ICC AS,pp. 1946-1950, 2008
  11. H. W. Jeon and S. Jung, 'Hardware design on an FPGA chip of Impedance force control for interaction between a human and a robot arm,' ASCC, pp. 1480-1485, 2009

Cited by

  1. Impedance-Control Based Peg-in-Hole Assembly with a 6 DOF Manipulator vol.35, pp.4, 2011, https://doi.org/10.3795/KSME-A.2011.35.4.347