참고문헌
- Lee, K. H., Kim, J. Y., "Overview and Future Direction of Cleaner Production System," Journal of the KSPE, Vol. 20, No. 8, pp. 12-16, 2003.
- Kang, J. H., "Environmentally Conscious Machining Technology and Machine-tool," Journal of the KSPE, Vol. 9, No. 1, pp. 9-17, 2000.
- Hwang, Y. K., Chung, W. J., Jung, J. Y. and Lee, C. M., "A Study on the Improvement of Cutting Force and Surface Roughness in MQL Turning," Transactions of the KSMTE, Vol. 15, No. 4, pp. 83-91, 2006.
- Hwang, Y. K., Chung, W. J., and Lee, C. M., "Experimental Study on Cutting Force and Surface Roughness Prediction in MQL Turning of Al 6061," Journal of the KSPE, Vol. 25, No. 6, pp. 159-167, 2008.
- Hwang, J., Chung, E. S. and Hwang, D. C., "A Study on the Environmentally Conscious Machining," Journal of the KSPE, Vol. 20, No. 2, pp. 50-57, 2003.
- Lee, J. H., Lee, S. J., Lee, S. W. and Choi, H. J., "Characteristics of Environment friendly Semi dry Turning," Journal of the KSPE, Vol. 19, No. 10, pp. 221-226, 2002.
- Dhar, N. R., Islam, M. W., Islam, S. and Mithu, M. A. H., "The influence of minimum quantity of lubrication on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel," Journal of Materials Processing Technology, Vol. 171, pp. 93-99, 2006. https://doi.org/10.1016/j.jmatprotec.2005.06.047
- Rahman, M., Senthil Kumar, A. and Salam, M. U., "Experimental evaluation on the effect of minimal quantities of lubricant in milling," IJMTM, Vol. 42, pp. 539-547, 2002.
- Yu, J. H., "A Study on Optimum Cutting Conditions of Hollow Cylinder by out of Roundness Measurement Method," M.S. thesis of Chungnam National University, 2001.
- Lee, S. H., "An Experimental Study on the Effect of Cylindricity for the Workpiece Length in Turning Machine," M.S. thesis of Chungbuk National University, 2001.
- Mun, C. O., "A Study on the Relation between Shape of Turned Part and Machining Variables," M.S. thesis of Kookmin University, 1995.
- www.vogelag.com
- Altintas, Y., "Manufacturing Automation-Metal Cutting Mechanics, Machine Tool vibrations, and CNC Design," Cambrideg, 2000.
- TaeguTec, "Catalogue-Turning Application," TaeguTec, 2003.
- Attanasio, A., Gelfi, M., Giardini, C. and Remino, C., "Minimal quantity lubrication in turning : Effect on tool wear," International Journal on the Science and Technology of Friction, Lubrication and Wear, Vol. 260, pp. 333-338, 2006.
- Research report of the Changwon National University Machine Tool Research Center, "Development of Cutting Technology Using Minimum Quantity Lubrication," Changwon National University Machine Tool Research Center, 2005.
- Mahr Korea, "Form-PC with MMQ 44CNC User's manual," Mahr Korea Ltd.
- Yum, Y. H., "Metal Cutting Principles of Machine Tools," Dongmyungsa, 2004.
- Yang, M. Y., "Metal cutting-principle and practice," Cheongmoongak, 2001.