Hip & pelvis

  • 제21권4호
  • /
  • Pages.320-326
  • /
  • 2009
  • /
  • 2287-3260(pISSN)
  • /
  • 2287-3279(eISSN)
대한고관절학회 (The Korean Hip Society)
권호 표지

인공고관절 재치환술에서 안정적으로 고정된 금속 비구컵에 시멘트를 이용한 폴리에틸렌 라이너 고정술의 단기 추시 결과

Short Term Results of Cementation of a Polyethylene Liner into a Well-Fixed Metal Shell

  • 권순용 (가톨릭대학교 의과대학 정형외과학교실) ;
  • 송주현 (가톨릭대학교 의과대학 정형외과학교실) ;
  • 한석구 (가톨릭대학교 의과대학 정형외과학교실) ;
  • 김동엽 (가톨릭대학교 의과대학 정형외과학교실) ;
  • 김승민 (가톨릭대학교 의과대학 정형외과학교실) ;
  • 이기행 (가톨릭대학교 의과대학 정형외과학교실)
  • Kwon, Soon-Yong (Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea) ;
  • Song, Joo-Hyoun (Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea) ;
  • Han, Suk-Ku (Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea) ;
  • Kim, Dong-Yeob (Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea) ;
  • Kim, Seung-Min (Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea) ;
  • Lee, Kee-Haeng (Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea)
  • 발행 : 2009.12.31

⟨ 이전 논문 다음 논문 ⟩

초록

목적: 인공고관절 재치환술에서 안정적으로 고정되어 있는 비구컵에 시멘트를 이용하여 라이너를 고정하는 술식에 대하여 임상적 및 방사선학적 결과를 평가하고자 하였다. 대상 및 방법: 2001년 11월부터 2006년 4월까지 10명의 환자, 11예를 대상으로 하였다. 재치환술시의 평균연령은 54.3세였으며 남자가 5명(6예), 여자가 5명 이었다. 이들의 평균 추시 기간은 35.2개월 이었다. 재치환술시 모든 비구컵은 안정적으로 고정되어 있었으며 비교적 만족스러운 위치를 보였다. 비구컵의 나사는 제거하고, 나사 구멍을 동종골로 채웠다. 비구컵의 내측면과 라이너의 후방면은 고속 천공기를 이용하여 홈을 만들어 주었다. 임상적 결과의 평가는 Harris hip score (HHS)로 하였고 방사선적 결과는 비구컵과 라이너의 위치 변화 및 점진적인 골 용해의 변화로 평가하였다. 결과: HHS는 술전 69.5점에서 최종 추시시 89.2점으로 향상 되었다. 방사선 소견에서 비구컵과 라이너의 위치 변화는 보이지 않았으며 대퇴 삽입물 및 비구컵 주위 골 용해의 진행은 없었다. 결론: 인공고관절 재치환술시 이 술식은 단기추시에서 만족할 만한 결과를 나타내었다.

Purpose: To evaluate the radiological and clinical results of cementation of a polyethylene liner into a well-fixed metal shell in revision total hip arthroplasty. Materials and Methods: From November 2001 to April 2006, 11 cases (10 patients) were included in this study. There were 5 males (6 cases) and 5 females with a mean age of 54.3 years. The mean follow-up period was 35.2 months. The acetabular shells were stable and their position was acceptable in all cases. Pre-existing screws were removed and screw holes were filled with allogenic bone. The inner surface of the metal shells and convex backside of the liners were roughened with a burr. The clinical results were evaluated using the Harris hip score (HHS) and the radiological results with evidence of a positional change in the acetabular cup and liner, and the progression of osteolysis around the cup. Results: The mean HHS was 69.5 points preoperatively and 89.2 at the last follow up. There was no change in the cup and liner position or progression of the osteolytic lesion around the femoral or acetabular components. Conclusion: Cementation of a polyethylene liner into a well-fixed metal shell showed satisfactory results in revisional total hip arthroplasty with a short term follow-up period.

키워드

참고문헌

  1. Bensen CV, Del Schutte H Jr, Weaver KD. Mechanical stability of polyethylene liners cemented into acetabular shells. Crit Rev Biomed Eng, 28: 7-10, 2000. https://doi.org/10.1615/CritRevBiomedEng.v28.i12.30
  2. Berry DJ, Barnes CL, Scott RD, Cabanela ME, Poss R. Catastrophic failure of the polyethylene liner of uncemented acetabular components. J Bone Joint Surg, 76-B: 575-578, 1994.
  3. Blaha JD. Well-fixed acetabular component retention or replacement: the whys and the wherefores. J Arthroplasty, l7(Suppl 1): S157-S161, 2002.
  4. Bonner KF, Delanois RE, Harbach G, Bushelow M, Mont MA. Cementation of a polyethylene liner into a metal shell. Factors related to mechanical stability. J Bone Joint Surg, 84-A: 1587-1593, 2002.
  5. Bono JV, Samford L, Toussaint JT. Severe polyethylene wear in total hip arthroplasty. Observations from retrieved AML PLUS hip implants with an ACS polyethylene liner. J Arthroplasty, 9: 119-125, 1994. https://doi.org/10.1016/0883-5403(94)90059-0
  6. Cameron HU. Dissociation of a polyethylene liner from an acetabular cup. Orthop Rev, 22: 1160-1161, 1993.
  7. Delanois RE, Seyler TM, Essner A, Schmidig G, Mont MA. Cementation of a polyethylene liner into a metal shell. J Arthroplasty, 22: 732-737, 2007. https://doi.org/10.1016/j.arth.2006.10.011
  8. Desantis M, Dorr LD, Longjohn DB, Wan Z. Can inserts be cemented into fixed shells at revision THR? Presented as a poster at the Annual Meeting of the American Academy of Orthopaedic Surgeons. Orlando, FL, Mar: 15-19, 2000.
  9. Engelbrecht DJ, Weber FA, Sweet MB, Jakim I. Longterm results of revision total hip arthroplasty. J Bone Joint Surg, 72-B: 41-45, 1990.
  10. Gonzalez della Valle A, Ruzo PS, Li S, Pellicci P, Sculco TP, Salvati EA. Dislodgment of polyethylene liners in first and second-generation Harris-Galante acetabular components. A report of eighteen cases. J Bone Joint Surg, 83-A: 553-559, 2001.
  11. Haft GF, Heiner AD, Callaghan JJ, et al. Polyethylene liner cementation into fixed acetabular shells J Arthroplasty. 17(Suppl 1): S167-S170, 2002. https://doi.org/10.1054/arth.2002.32465
  12. Haft GF, Heiner AD, Dorr LD, Brown TD, Callaghan JJ. A biomechanical analysis of polyethylene liner cementation into a fixed metal acetabular shell. J Bone Joint Surg, 85-A: 1100-1110, 2003.
  13. Kummer FJ, Adams MC, Dicesare PE. Revision of polyethylen acetabular liners with a cemented polyethylene cup: a laboratory study. J Arthroplasty, l7: 1055-l057, 2002.
  14. LaPorte DM, Mont MA, Pierre-Jacques H, Peyton RS, Hungerford DS. Technique for acetabular liner revision in a nonnmodular metal-backed component. J Arthroplasty, 13: 348-350, 1998. https://doi.org/10.1016/S0883-5403(98)90184-X
  15. Maloney WJ, Herzwurm P, Paprosky W, Rubash HE, Engh CA. Treatment of pelvic osteolysis associated with a stable acetabular component inserted without cement as part of a total hip replacement. J Bone Joint Surg, 79-A: 1628-1634, 1997.
  16. Meldrum RD, Hollis JM. The strength of a cement acetabular locking mechanism. J Arthroplasty, 16: 748-752, 2001. https://doi.org/10.1054/arth.2001.25501
  17. Mihalko WM, Papademetriou T. Polyethylene liner dissociation with the Harris-Galante II acetabular component. Clin. Orthop Relat Res, 386: 166-172, 2001. https://doi.org/10.1097/00003086-200105000-00021
  18. Paprosky W. Treatment of progressive periacetabular osteolysis: cup revision versus liner exchange and bone grafting Instructional Corse Lecture. 66th Annual Meeting of the American Academy of Orthopaedic Surgeons, February, 1999.
  19. Peters CL, Sullivan CL. Locking mechanism failure in the Harris-Galante porous acetabular component associated with recurrent hip dislocation. J Arthroplasty, 17: 507- 515, 2002. https://doi.org/10.1054/arth.2002.31075
  20. Ranawat CS, DiGiovanni C, Pellicci P. Treatment of recurrent instability after hybrid total hip arthroplasty by cementing constrained, all-polyethylene liners into wellfixed, metal-backed shells: two-year results. Presented as a poster at the Annual Meeting of the American Academy of Orthopaedic Surgeons. Orlando, FL, Mar: 15-19, 2000.
  21. Scott DL, Campbell PA, McClung CD, Schmalzried TP. Factors contributing to rapid wear and osteolysis in hips with modular acetabular bearings made of hylamer. J Arthroplasty, 15: 35-46, 2000. https://doi.org/10.1016/S0883-5403(00)91103-3
  22. Terefenko KM, Sychterz CJ, Orishimo K, Engh CA Sr. Polyethylene liner exchange for excessive wear and osteolysis. J Arthroplasty, 17: 798-804, 2002. https://doi.org/10.1054/arth.2002.32705
  23. Yoon TR, Seon JK, Song EK, Chung JY, Seo HY, Park YB. Cementation of a metal-inlay polyethylene liner into a stable metal shell in revision total hip arthroplasty. J Arthroplasty, 20: 652-657 2005. https://doi.org/10.1016/j.arth.2005.01.019