DOI QR코드

DOI QR Code

메탈릭 자카드 직물 물리적 성능평가

Physical Performance of Metallic Jacquard Fabrics

  • Kang, Duck-Hee (Dept. of Clothing & Textiles, Chungnam National University) ;
  • Lee, Jung-Soon (Dept. of Clothing & Textiles, Chungnam National University)
  • 발행 : 2009.01.31

초록

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.

키워드

참고문헌

  1. 김은애, 박명자, 신혜원, 오경화. (2000). 의류소재의 이해와평가. 서울: 교문사
  2. 서정권, 이정욱. (1996). 직물의 평면 드레이프 계수와 측면 드레이프 계수와의 관계. 한국의류학회지, 20(3), 519−526
  3. 송경자, 진영길. (2005). CAD를 활용한 자카드 텍스타일 디자인 개발 프로세싱 연구-넥타이 디자인을 중심으로. 한국의류학회지, 29(5), 662−670
  4. 유명 브랜드 숙녀용 정장, 실용성 미흡. (2002, 4. 19). 한국소비자보호원. 자료검색일 2008, 5, 24, 자료출처 http://www.kca.go.kr
  5. 윤영상. (2006). 마찰대전압과 반감기 동시측정에 의한 직물의 정전기적 특성 평가. 건국대학교 대학원 박사학위논문
  6. 이영재. (2002). 현대 패션디자인의 금속소재 연구-모드사적 분석과 조형성을 중심으로-. 한국의류학회지, 26(5), 582−593
  7. 정인희. (2007). 모시를 활용한 니트소재 개발에 관한 연구. 한양대학교 대학원 박사학위 논문
  8. Kawabata, S. (1980). The standardization and analysis of hand evaluation (2nd ed.). Kyoto: The Textile Machinery Society of Japan
  9. Kawabata, S., Postle, R., & Niwa, M. (1982). Objective specification of fabric quality-mechanical properties and performance. Kyoto: The Textile Machinery Society of Japan
  10. Kawabata, S., Niwa, M., & Wang, F. (1994). Objective hand measurement of nonwoven fabrics, Part I: Development of the equations. Textile Res. J., 64, 597−610 https://doi.org/10.1177/004051759406401008

피인용 문헌

  1. Mechanical Properties and Sensibility Evaluation of Jacquard Fabric with Optical Fiber vol.19, pp.2, 2017, https://doi.org/10.5805/SFTI.2017.19.1.240
  2. The Effect of Mordant on the Mechanical Properties and Primary Hand Values of Fabrics Dyed with Bamboo and Pine Leaf Extracts vol.14, pp.4, 2012, https://doi.org/10.5805/KSCI.2012.14.4.648