References
- 김혜경. (1991). 플레어 스커트의 드레이프성과 착장형태파악에 관한 연구. 한국의류학회지, 15(1), 38−47
- 김혜경, 서추연, 석은영, 박순지, 임지영. (2001). 3D Scanner를 이용한 여성용 기성복 재킷의 착의적합성에 관한 비교평가 연구. 한국의류학회지, 25(10), 1707−1718
- 김혜경, 석은영, 서추연. (2000). 3D Scanner를 이용한 인체계측방법 및 플레어스커트의 착의형태평가방법에 관한연구. 한국의류학회지, 24(6), 895−906
- 남윤자, 최경미, 정의승, 윤명환. (2004). Size Korea 3차원인체 측정 방법 표준화. 패션정보와 기술, 1, 6−19
- 박은주. (1993). 청년기 남성의 상반신 체형 분석 및 원형 설계를 위한 피복 인간공학적 연구. 연세대학교 대학원 박사학위 논문
- 박창규. (2004). 의류.패션산업에서의 3차원 및 디지털 응용기술의 현황. 패션정보와 기술, 1, 96−100
- 백경자, 이정란. (2003). 20대 남성의 어깨부위 형태 및 길원형에 관한 연구. 한국의류학회지, 27(3/4), 429−440
- 서추연. (2002). 3D scanner를 이용한 여성복 재킷의 패턴사이즈에 따른 착의평가 연구. 한국의류학회지, 26(3/4),390−401
- 심규남, 김진선, 이원자. (2000). 착의 단면 중합도 분석에 의한 길원형의 여유률 산출-3차원 형상 계측기에 의한-.한국의류산업학회지, 2(4), 360−365
- 이영희, 김혜경, 서추연. (1997). 직장 여성을 위한 재킷의 착의평가방법에 관한 연구. 한국의류학회지, 21(8), 1365−1375
- 이정임, 주소령, Susan P. Ashdown. (2004). 노년 여성 체형의 표준화된 3차원 측정 데이터 추출을 위한 기초 연구. 한국의류학회지, 28(2), 344−353
- 조윤주, 이정란. (2002). 의복 원형 설계의 착의평가방법 비교. 한국의류산업학회지, 4(4), 383−393
- 최미성. (2002). 의복 원형의 외관과 맞음새를 위한 관능평가방법에 대한 연구. 한국의류학회지, 26(11), 1627−1637
- Ashdown, S. P., Loker, S., Schoenfelder, K., & Lyman-Clarke, L. (2004, Summer). Using 3D scans for fit analysis. Journal of Textile and Apparel, Technology and Management. Retrieved September 24, 2008, from http://www.tx.ncsu.edu/jtatm/volume4issue1/articles/Loker/Loker_full_103_04.pdf
- Kohn, I. L. & Ashdown, S. P. (1998). Using video capture and image analysis to qualify apparel fit. Textile Research Journal, 68(1), 17−26 https://doi.org/10.1177/004051759806800103
- Loker, S., Ashdown, S. P., Cowie, L., & Schoenfelder, K. A. (2004, Summer). Consumer interest in commercial applications of body scan data. Journal of Textile and Apparel, Technology and Management. Retrived September 24, 2008, from http://www.tx.ncsu.edu/jtatm/volume4issue1/articles/Loker/Loker_ full_100_04.pdf
- Mckinnon, L. & Istook, C. L. (2002). Body scanning. Journal of Fashion Marketing and Management, 6(2), 103−121 https://doi.org/10.1108/13612020210429458
Cited by
- Comparison and analysis of men's classic-fit and slim-fit shirt patterns - Utilizing the 3D virtual try-on system - vol.22, pp.2, 2014, https://doi.org/10.7741/rjcc.2014.22.2.209
- Bodice Pattern Development of the Slim-fit Dress Shirt for Middle-aged Males Using 3D Body Scanning Data vol.40, pp.1, 2016, https://doi.org/10.5850/JKSCT.2016.40.1.171
- A Study on Expressivity of Virtual Clothing made of 3D Apparel CAD System according to the Physical Properties of Fabric vol.17, pp.4, 2015, https://doi.org/10.5805/SFTI.2015.17.4.613
- An analysis on the Fit Preferences of Breeches using 3D Lower Body Scan data vol.15, pp.6, 2013, https://doi.org/10.5805/SFTI.2013.15.6.1000
- Development of Bodice Block Reflects Brassiere Cup Size vol.28, pp.1, 2017, https://doi.org/10.7856/kjcls.2017.28.1.69