Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Dynamic Simulation of Solid Particle Considering Change by Viscosity in Rheology Material

반응고 재료에서 점성을 고려한 고상입자의 거동예측을 위한 수치모사 해석

  • 권기영 (부산대학교 하이브리드소재솔루션 협동과정) ;
  • 강충길 (부산대학교 기계공학부)
  • Published : 2009.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

It was reported that the semi-solid forming process has many advantages over the conventional forming process, such as a long die life, good mechanical properties and energy savings. It is very important, however, to control liquid segregation to gain mechanical property improvement of materials. During forming process, rheology material has complex characteristics, thixotropic behavior. Also, difference of velocity between solid and liquid in the semi-solid state material makes a liquid segregation and specific stress variation. Therefore, it is difficult for a numerical simulation of the rheology process to be performed. General plastic or fluid dynamic analysis is not suitable for the behavior of rheology material. The behavior and stress of solid particle in the rheology material during forging process is affected by viscosity, temperature and solid fraction. In this study, compression experiments of aluminum alloy were performed under each other tool shape which is rectangle shape(square array), rectangle shape(hexagonal array), and free shape tool. In addition, the dynamics behavior compare with Okano equation to power law model which is viscosity equation.

Keywords

References

  1. G. Chirmetta, L. Zanardi, 1996, Production of Structural Components by Thixoforming Aluminum Alloys, Proc. of the 4th Int. Conf. on Semi-Solid Processing of alloys and Composites, Sheffield, June 1996D. H. Kirkwood, P. Kapranos, Eds. Univ. of Sheffield, UK, pp. 235-244
  2. K. P. Young, 1996, Semi-Solid Metal Forming Alloys and Composites, Nauture and Properties of Semi-Solid Materials Proc. of a Symposium by the TMS Solidification Committee of the Material Design and Manufacture Division, pp. 245-266
  3. M. C. Flemings, 1991, Behavior of Metal Alloys in the Semi-Solid State, Metallurgical Transactions A. Volume 22A, pp. 957-981 https://doi.org/10.1007/BF02661090
  4. C. G. Kang, P. K. Seo, S. S. Kang, 2006, The effect of injection velocity on liquid segregation and mechanical properties in arm part fabrication by semi-solid die casting, Journal of Materials Processing Technology, 176, pp. 32-40 https://doi.org/10.1016/j.jmatprotec.2006.02.002
  5. P. K. Seo, S. W. Youn, C. G. Kang, The effect of test specimen size and strain rate on liquid segregation deformation behavior of mushy state materials, Journal of Materials Processing Technology, Vol. 130-131 pp. 551-557 https://doi.org/10.1016/S0924-0136(02)00762-8
  6. W. Y. Kim, C. G. Kang, B. M. Kim, 2007, Deformation behavior of wrought aluminum alloys in incremental compression experiment with a closed die, Journal of Materials Processing Technology, 191, pp. 372-376 https://doi.org/10.1016/j.jmatprotec.2007.03.100
  7. B. Alder, T. Wainwright, 1959, Studies in molecular dynamics I. General method, J. Chem. Phys. Vol. 31, p.459 https://doi.org/10.1063/1.1730376
  8. B. Alder, T. Wainwright, 1960, Studies in molecular dynamics II. Behavior of a small number of elastic spheres, J. Chem., Phys., Vol. 33, p. 1439 https://doi.org/10.1063/1.1731425
  9. W. G. Hoover, 1986, Molecular dynamics, Int. lect. Notes Phys. Vol. 258, Spring-Verlag, Berlin, p. 13
  10. W. G. Hoover, A. J. De Groot, C. G. Hoover, I. F. Stowers. T. Kawai, B. L. Holian, T. Boku, S. Ihara, J. Belak, 1990, Large scale elastic-plastic indentation simulations via non-equlibrium molecular dynamics, Phys. Rev. A, Vol.42(10), p. 5844 https://doi.org/10.1103/PhysRevA.42.5844
  11. J. Belak, 1994, Nanotribology: modelling atoms when surfaces collide, in: Energy & Technology Review, Lawrence Livermore Laboratory, Livermore, CA, p. 13
  12. N. Ikawa, S. Shimada, H. Tanaka, G. Ohmori, 1991, An atomistic analysis of nanometric chip removal as affected by tool-work interaction in diamond turning, Ann. CIRP, Vol.40(1), p. 551 https://doi.org/10.1016/S0007-8506(07)62051-4
  13. S. Shimada, N. Ikawa, G. Ohmori, H. Tanaka, 1992, Molecular dynamics analysis as compared with experimental results of micromachining, Ann. CIRP, Vol.41(1), p. 117 https://doi.org/10.1016/S0007-8506(07)61165-2
  14. S. Shimada, N. Ikawa, H. Tanaka, G. Ohmori, J. Uchikoshi, H. Yoshinaga, 1993, Feasibility study on ultimate accuracy in microcutting using molecular dynamics simulation, Ann. CIRP, Vol.42(1), p. 91 https://doi.org/10.1016/S0007-8506(07)62399-3
  15. S. Shimada, N. Ikawa, H. Tanaka, J. Uchikoshi, 1994, Structure of micromachined surface simulated by molecular dynamics analysis, Ann. CIRP, Vol.43(1), p. 51 https://doi.org/10.1016/S0007-8506(07)62162-3
  16. S. Shimada, 1995, Molecular dynamics analysis of nanometric cutting process, Int. J. Jpn. Soc. Precis. Eng., Vol.29(4), p. 283
  17. T. Inamura, H. Suzuki, N. Takezawa, 1991, Cutting experimentals in a computer using atomic models of copper crystal and a diamond tool, Int. J. Jpn. Soc. Precis. Eng., Vol.25(4), p. 259
  18. T. Inamura, N. Takezawa, N. Taniguchi, 1992, Atomic-scale cutting in a computer using crystal models of copper and diamond, Ann. CISP, Vol.41(1), p. 121 https://doi.org/10.1016/S0007-8506(07)61166-4
  19. T. Inamura, N. Takezawa, Y. Kumaki, 1993, Mechanics and energy dissipation in nanoscale cutting, Ann. CIRP, Vol.42(1), p. 79 https://doi.org/10.1016/S0007-8506(07)62396-8
  20. T. Inamura, N. Takezawa, Y. Kumaki, T. Sata, 1994, On a possible mechanism of shear deformation in nanoscale cutting, Ann. CIRP, Vol.43(1), p. 47 https://doi.org/10.1016/S0007-8506(07)62161-1
  21. W. G. Hoover, 1986, Molecular dynamics, int. lect. Notes Phys. Vol. 258, Spring-Verlag, Berlin, pp.13
  22. B. V. Derjagin, L. Landau, 1941, Theory of the stability of strongly charged lyphobic sols the adhesion of strongly charged particles in solutions of electrolytes, Acta Physiochem. URSS(14), pp. 633-662
  23. E. J. W. Verywey, J. Th. G. Overbeek, 1948, Thetheory of the stability of lyophobic colloids, Elsevier
  24. S. Okano, 1994, Research Activities in Rheo-Technology Ltd., The 3rd Int. Conf. on Semi-Solid Processing of Alloy and Composites, pp. 7-13, Tokyo, June
  25. H. Peng, S. P. Wang, K. K. Wang, 1994, Rheomolding-Injection Molding of Semi-Solid Metals, The 3rd Int. Conf. on Semi-Solid Processing of Alloy and Composites, pp. 191-200, Tokyo, June
  26. W. Y. Kim, C. G. Kang, B. M. Kim, 2007, The effect of the solid fraction on rheological behavior of wrought aluminum alloys in incremental compression experiments with a closed die, Materials Science and Engineering A, Vol. 447, pp. 1-10 https://doi.org/10.1016/j.msea.2006.10.019