Current Research on Agriculture and Life Sciences
- Volume 27
- /
- Pages.29-33
- /
- 2009
- /
- 2287-271X(pISSN)
- /
- 2288-0356(eISSN)
Preparation and Properties of Liquefied-Wood Polymer Composite
액화목재복합체(LWPC)의 제조 및 물성
- Kim, Chul-Hyun (Department of Wood Science and Technology, Kyungpook National University) ;
- Kim, Kang-Jae (Department of Wood Science and Technology, Kyungpook National University) ;
- Eom, Tae-Jin (Department of Wood Science and Technology, Kyungpook National University)
- Published : 2009.12.31
Abstract
Liquefied-wood polymer composite was prepared and mechanical properties was evaluated to develop potential utility of liquefied wood. The liquefied wood was made from waste wood and chemical modified with acetic anhydride and maleic anhydride (MA), phtalic anhydride (PA). The composite sheet was prepared from modified liquefied-wood and polymer(PE). The mechanical, chemical and microscopical properties composite sheet were investigated. The results were summarized as follows, 1. The tensile strength was increased and breaking elongation of composite sheet was decreased with the time of acetylation and the dosage of MA. 2. The Young's modulus of composite sheet was gradually decreased with the dosage of PA. 3. The peak intensity of 1737cm-1 in FT-IR spectra of chemical modified liquefied woods was increased. 4. The dispersity of liquefied woods with PE was improved with chemical modification.