DOI QR코드

DOI QR Code

Design of a 2MW Blade for Wind Turbine and Uni-Directional Fluid Structure Interaction Simulation

2 MW급 풍력터빈 블레이드 설계 및 단방향 유체-구조연성해석

  • 김범석 ((사)한국선급 에너지.환경사업단) ;
  • 이강수 ((사)한국선급 에너지.환경사업단) ;
  • 김만응 ((사)한국선급 에너지.환경사업단)
  • Published : 2009.12.01

Abstract

The purposes of this study are to evaluate the power performance through CFD analysis and structural integrity through uni-directional FSI analysis in aerodynamic design and structure design of wind turbine blade. The blade was designed to generate the power of 2MW under the rated wind speed of 11 m/s, consisting of NACA 6 series, DU series and FFA series airfoil. The inside section of the blade was designed into D-spar structure and circular stiffener was placed to reinforce the structural strength in the part of hub. CFD analysis with the application of transitional turbulence model was performed to evaluate the power performance of blade according to the change of TSR and 2.024MW resulted under the condition of rated wind speed. TSR of 9 produced the maximum power coefficient and in this case, Cp was 0.494. This study applied uni-directional FSI analysis for more precise evaluation of structural integrity of blade, and the results of fiber failure, inter fiber failure and eigenvalue buckling analysis were evaluated, respectively. For the evaluation, Puck's failure criteria was applied and the result showed that fiber failure and inter fiber failure did not occur under every possible condition of the analysis. As a result, power performance and structural integrity of 2 MW blade designed in this study turned out to satisfy the initial design goals.

Keywords

References

  1. Rados, K., Larsen, G., Barthelmie, R., Schlez, W., Hassan, U., Lange, B., Waldl, I. and Magnusson, M., 2007, ' A Comparison of Wake Model Performances in an Offshore Environment,' RISO Report
  2. Passon, P., Kuhn, M., Butterfield, S., Jonkman, J., Camp, T. and Larsen, T. J., 2007, ' OC3-Benchmark Exercise of Aero-elastic Offshore Wind Turbine Code,' Journal of Physics, Conference Series 75(2007) 012071 https://doi.org/10.1088/1742-6596/75/1/012071
  3. Laursen, J., Enevoldsen, P. and Hjort, S., 2007, ' 3D CFD Quantification of the Performance of a Multi Megawatt Wind Turbine,' Journal of Physics, Conference Series 75(2007) 012007 https://doi.org/10.1088/1742-6596/75/1/012007
  4. International Electrotechnical Commission, 1999, ' Wind Turbine Generator Systems - Part 1: Safety Requirements,' IEC 61400-1:1999(E)
  5. Kim, B.S., Kim, M.E. and Eum, H.J., 2008, ' Ultimate Load Assessment and Performance Prediction of a Horizontal Axis Wind Turbine,' Proc. of the Autumn conf. of the KSME, CD-Rom Proc
  6. Glauert, H., 1935, ' Airplane Propellers,' Aerodynamic Theory, Vol. 4, Div. I, W.F. Durand, ed., Berlin: Julisis Springer, pp. 169-360
  7. Dayton A. Griffin, 2002, ' Blade System Design Studies Volume I : Composite Technologies for Large Wind Turbine Blades,' SAND2002-1879
  8. Langtry, R.B., Gola, J. and Menter, F.R., 2006, ' Predicting 2D airfoil and 3D Wind Turbine Rotor Performance Using a Transition Turbulence Model for General CFD Codes,' AIAA 2006-395
  9. Kim, B.S., Kim, M.E. and Lee, Y.H., 2008, ' Predicting the Aerodynamic Characteristics of 2D Airfoil and the Performance of 3D Wind Turbine using CFD Code,' Journal of the KSME(B), Vol. 32, No. 7, pp. 549-557 https://doi.org/10.3795/KSME-B.2008.32.7.549
  10. Puck, A. and Schurmann, H., 1998, ' Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models,' Composite Science and Technology, 58, pp. 1045-1067 https://doi.org/10.1016/S0266-3538(96)00140-6
  11. Korean Register of Shipping, 2008, ' Technical Guidelines for Wind Turbines,' Korean Register of shipping, pp. 126-128

Cited by

  1. Structural Stability Evaluation on the shape of impeller for Industrial agitator vol.12, pp.2, 2011, https://doi.org/10.5762/KAIS.2011.12.2.611
  2. Study on Application of Equivalent Stiffness Modeling Method for Static Aeroelastic Analysis of Large Scale Wind Turbine Rotor System vol.29, pp.11, 2012, https://doi.org/10.7736/KSPE.2012.29.11.1236