Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Noise and Vibration Analysis for Net Form Slabs

네트공법 슬라브의 소음 및 진동 해석

  • 김영우 (호서대학교 공과대학 자동차공학과) ;
  • 강기준 (호서대학교 공과대학 자동차공학과) ;
  • 정준오 (호서대학교 공과대학 환경공학과)
  • Published : 2009.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The slab(flat) truss plate used for building construction is analyzed for vibration and noise. Using floor impact test and numerical method (FEM), both net form and traditional form are compared for vibration and noise. The results show that the frequencies of a net form are lower than those of a traditional form in the case of free vibration, and the noise values of a net form are lower than those of a traditional form for the range from 500 Hz to 2000 Hz.

Keywords

References

  1. Lee, S. W., 2006, 'A Study on the Dicisive Factors for Floor Impact Sound Performance in High-rise Residential Buildings,' Journal of the Architectural Institute of Korea - Planning and Design, Vol. 22, No. 3, pp. 303-310
  2. Shin, Y. S., Choi, H. B., Lee, U. K, Ann, S. H. and Kang, K. I., 2006, 'A Study on Selection of Slab Form Work System for High-rise Building Construction,' Journal of the Architectural Institute of Korea - Structure and Construction, Vol. 22, No. 2, pp. 147-154
  3. Kim, G. C. and Kim, K. M., 2007, 'A Study on the Characteristics of Vibration and Impact Sound at the Hollow Slab,' Journal of the Architectural Institute of Korea - Structure and Construction, Vol. 23, No. 4, pp. 59-69
  4. Seo, J. R., Hwang, J. S., Song, J. G. and Kim, S. W., 2004, 'An Experimental Study on the Noise and Vibration Reduction Effect Depending on Dynamic Property of Slab,' Proceedings of Architectural Institute of Korea, Vol. 24, No. 1, pp. 161-164
  5. Kim, Y. C., Ju, Y. K. and Kim, S. D., 2004, 'Finite Element Analysis on Structural Behaviour of Concrete-Filled Tube Column to Flat Plate Slab Joint,' Journal of the Architectural Institute of Korea - Structure and Construction, Vol. 40, No. 8, pp. 3-10
  6. Chung. J. A. and Choi, S. M., 2004, 'Structural Behavior of H-Shaped Beam-to-square Tube Column Connection reinforced with Vertical Stiffeners,' Journal of the Architectural Institute of Korea - Structure and Construction, Vol. 20, No. 4, pp. 59-66
  7. Sun, R. J., Lim, J. S. and Jeong, J. H., 2008, 'Sensitivity Analysis of Load Transfer of Jointed Concrete Pavements Using 3-D Finite Element Model,' Journal of the Korean Society of Road Engineers, Vol. 10, No. 1, pp. 145-157
  8. Kim, T. J., Park, J. H. and Lee, U., 2003, 'Sound Radiation Characteristics of a Cracked Rectangular Vibrating Plate,' Journal of the Korean Society for Railway, Vol. 6, No. 3, pp. 163-168
  9. Choi, J. H., 2000, 'Shape Sesign Sensitivity Analysis of Thermal Conduction Problems using Commercial Software ANSYS,' Trans of the KSME A, Vol. 24, No. 3, pp. 645-652
  10. Han. J. S., 2005, ' Efficient Vibration Simulation Using Model Order Reduction,' Trans of the KSME A, Vol. 30, No. 3, pp. 310-317 https://doi.org/10.3795/KSME-A.2006.30.3.310