DOI QR코드

DOI QR Code

A Study on Optimal Wear Design for a Gerotor Pump

제로터 펌프의 마멸 최적설계에 관한 연구

  • 권순만 (창원대학교 기계설계공학과) ;
  • 남형철 (창원대학교 대학원 기계설계공학과) ;
  • 여뢰 (창원대학교 대학원 기계설계공학과) ;
  • 신중호 (창원대학교 기계설계공학과)
  • Published : 2009.01.01

Abstract

A disadvantage in the design of gerotor pump is a lack of parts that can be adjusted to compensate for wear in the rotor set, and as a consequence, it causes a sharp reduction of efficiency. In this paper, an attempt has been made to reduce the wear rate between the rotors of a gerotor pump. To do this, floating genetic algorithm (FGA) is used as an optimization technique for minimizing the wear rate proportional factor (WRPF). The result shows that the wear rate can be reduced considerably, e.g. approximately 8% in this paper, throughout the optimization using FGA.

Keywords

References

  1. Shin, J.-H., Kwon, S.-M., 2006, "On the Lobe Profile Design in a Cycloid Reducer Using Instant Velocity Center," Mechanism and Machine Theory, Vol. 41, No. 5, pp. 596-616 https://doi.org/10.1016/j.mechmachtheory.2005.08.001
  2. Kim, J.C., 2007, "A Study on Tooth-Profile Design in a Trochoid-Gear Pump." Master thesis, Changwon National University, Republic of Korea
  3. Kwon, S.-M., Kim M.S., Shin, J.-H., 2008. "Analytical Wear Model of a Gerotor Pump Without Hydrodynamic Effect" JSME, Journal of Advanced Mechanical Design, System, and Manufacturing, Vol. 2, No. 2, pp. 230-237 https://doi.org/10.1299/jamdsm.2.230
  4. Kim, M.S., 2008, "A Study on Contact Stress and Wear Characteristics for a Gerotor Pump," Master Thesis, Changwon National University, Republic of Korea
  5. Shigley, J.E. and Uicker, Jr. J.J. 1980, Theory and Machines and Mechanisms. McGraw-Hill
  6. Palmgren, A., 1967, Les Roulements. Description, Theorie, Applications (SKF Compagnie d'Applications Mecaniques)

Cited by

  1. Contact Surface Fatigue Life for RPG System vol.35, pp.11, 2011, https://doi.org/10.3795/KSME-A.2011.35.11.1453
  2. Pitting Life for RRP System vol.36, pp.4, 2012, https://doi.org/10.3795/KSME-A.2012.36.4.387
  3. Optimal design of the gerotor (2-ellipses) for reducing maximum contact stress vol.30, pp.12, 2016, https://doi.org/10.1007/s12206-016-1128-z
  4. Optimal Wear Design for a Hypotrochoidal Gear Pump without Hydrodynamic Effect vol.33, pp.12, 2009, https://doi.org/10.3795/KSME-A.2009.33.12.1383