Korean Journal of Metals and Materials (대한금속재료학회지)

The Korean Institute of Metals and Materials (대한금속재료학회)
권호 표지

Mechanical Properties of Sisal Fiber Reinforced Composites on Surface Treatment and Temperature

사이잘섬유강화 복합재료의 표면처리와 환경온도에 따른 기계적 특성

  • Song, Jun Hee (R&D Center, EUNSAN BS&T, Co., Ltd.) ;
  • Kim, Yonjig (Division of Mechanical Design Engineering, Chonbuk National University)
  • 송준희 ((주) 은산비에스엔티 기술연구소) ;
  • 김연직 (전북대학교 공과대학 기계설계공학부)
  • Received : 2008.03.26
  • Published : 2008.08.25
⟨ Previous Next ⟩

Abstract

There has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. It was demonstrated to determine the characteristic of tensile behaviors under the variation of test temperature on sisal fiber reinforced polymer composites by RTM process. Especially, the permanganate-treated-fibers improved tensile strength by increasing the coherence with matrix. Material deformation is restricted to increment of cohesion for surface treatment of fiber and then elongation decreas.

Keywords

References

  1. Mike and Pam Brady, Reinforced Plastics 51, 26 (2007)
  2. Toshio Ogasawara, Yuichi Ishida, Rikio Yokota, Toshitaka Watanabe, Tatsuji Aoi and Jun Goto, Composites Part A: Applied Science and Manufacturing 38, 1296 (2007) https://doi.org/10.1016/j.compositesa.2006.11.007
  3. R. Rattan and Jayashree Bijwe, Wear 262, 568 (2007) https://doi.org/10.1016/j.wear.2006.07.001
  4. M. Grujicic, B. Pandurangan, K.L. Koudela and B.A. Cheeseman, Applied Surface Science 253, 730 (2006) https://doi.org/10.1016/j.apsusc.2006.01.016
  5. Paolo Feraboli, Attilio Masini, Luigi Taraborrelli and Andrea Pivetti, Composite Structures 78, 495 (2007) https://doi.org/10.1016/j.compstruct.2005.11.011
  6. Pizhong Qiao and Mijia Yang, Composites Part B: Engineering 38, 739 (2007) https://doi.org/10.1016/j.compositesb.2006.07.014
  7. Angelo G. Facca, Mark T. Kortschot and Ning Yan, Composites Science and Technology 67, 2454 (2007) https://doi.org/10.1016/j.compscitech.2006.12.018
  8. Nikki Sgriccia and M.C. Hawley, Composites Science and Technology 67, 1986 (2007) https://doi.org/10.1016/j.compscitech.2006.07.031
  9. M. Zampaloni, F. Pourboghrat, S. A. Yankovich, B. N. Rodgers, J. Moore, L. T. Drzal, A. K. Mohanty and M. Misra, Composites Part A: Applied Science and Manufacturing 38, 1569 (2007) https://doi.org/10.1016/j.compositesa.2007.01.001
  10. H. N. Dhakal, Z.Y. Zhang and M.O.W. Richardson, Composites Science and Technology 67, 1674 (2007) https://doi.org/10.1016/j.compscitech.2006.06.019
  11. Yan Li, Yiu-Wing Mai and Lin Ye, Composites Science and Technology 60, 2037 (2000) https://doi.org/10.1016/S0266-3538(00)00101-9
  12. T. Behzad and M. Sain, Composites Science and Technology 67, 1666 (2007) https://doi.org/10.1016/j.compscitech.2006.06.021
  13. Jennifer Smith and Shobha Bhatia, Materials Today 8, 72 (2005)
  14. P. Antich, A. Vazquez, I. Mondragon and C. Bernal, Composites Part A: Applied Science and Manufacturing 37, 139 (2006) https://doi.org/10.1016/j.compositesa.2004.12.002
  15. P.A. Sreekumar, Kuruvilla Joseph, G. Unnikrishnan and Sabu Thomas, Composites Science and Technology 67, 453 (2007) https://doi.org/10.1016/j.compscitech.2006.08.025