DOI QR코드

DOI QR Code

Simulation of Texture Evolution and Anisotropic Properties in DP Steels during Deep Drawing Process

디프도로잉 시 DP강의 집합조직 및 이방성 거동 모사

  • Published : 2008.11.01

Abstract

A visco-plastic self-consistent (VPSC) polycrystal model has been applied to simulate texture simulation and anisotropic properties of DP steels during deep drawing process. In order to evaluate the strain path during deep drawing, a steady state was assumed in the flange part of deep drawn cup. The final stable orientations were strongly dependent on the initial location in the blank. The evolution of anisotropy of DP steel sheets has been demonstrated through comparison of plastic strain rate vector at the different plastic strain levels.

Keywords

References

  1. O. Grassel, L. Kruger, G. Frommeyer, L. W. Meyer, 2000, High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application, Int. J. Plasticity., Vol. 16, pp. 1391-1409 https://doi.org/10.1016/S0749-6419(00)00015-2
  2. D. T. Llewellyn, D. J. Hillis, 1996, Dual phase steels, Ironmaking and Steelmaking., Vol. 23, pp. 471-478
  3. J. Hu, K. Ikeda, T. Murakami, 1998, Effect of texture components on plastic anisotropy and formability of aluminum alloy sheets, J. Mater. Proc. Tech.., Vol. 73, pp. 49-56 https://doi.org/10.1016/S0924-0136(97)00211-2
  4. C. L. Xie, E. Nakamachi, 2002, Investigations of the formability of BCC steel sheets by using crystalline plasticity finite element analysis, Mater. Design, Vol. 23, pp. 59-68 https://doi.org/10.1016/S0261-3069(01)00043-7
  5. E. Nakamachi, C. L. Xie, M. Harimoto, 2001, Drawability assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses, Int. J. Mech. Sci., Vol. 43, pp. 631-652 https://doi.org/10.1016/S0020-7403(00)00048-5
  6. R. K. Ray, J. J. Jonas, M. P. Butron-Guillen, J. Savoie, 1994, Transformation textures in steels, ISIJ Int., Vol. 34, pp. 927-942 https://doi.org/10.2355/isijinternational.34.927
  7. T. Senuma, 2001, Physical Metallurgy of modern high strength steel sheets, ISIJ., Vol. 41, pp. 520-532 https://doi.org/10.2355/isijinternational.41.520
  8. C. L. Xie, E. Nakamachi, 2002, The effect of crystallographic textures on the formability of high- strength steel sheet, J. Mater. Proc. Tech., Vol. 122, pp. 104-111 https://doi.org/10.1016/S0924-0136(01)01234-1
  9. R. W. Cahn, P. Haasen, E. J. Kramer, 1992, Materials Science and Technology, A comprehensive treatment, Vol. 7, Constitution and properties of steel, VCH, pp. 285-333
  10. S. -H. Choi, J. H. Cho, F. Barlat, K. Chung, J. W. Kwon, K. H. Oh, 1999, Prediction of yield surface of textured sheet metals, Metall. Trans., Vol. 30A, pp. 377-386
  11. D. Daniel, J Savoie, J. J. Jonas, 1992, Textures induced by tension and deep drawing in low carbon and extra low carbon steel sheets, Acta Metall. Mater., Vol. 41, pp. 1907-1920
  12. R. Saha, R. K. Ray, 2008, Effects of severe cold rolling on the texture and grain boundary character of a Ti-Nb IF steel, Mater. Lett., Vol. 62, pp. 222-225 https://doi.org/10.1016/j.matlet.2007.04.112
  13. J. Savoie, J. J. Jonas, 1994, Simulation of the deformation textures induced by deep drawing in extra low carbon steel sheets, Acta Metall. Mater., Vol. 42, pp. 4101-4116 https://doi.org/10.1016/0956-7151(94)90188-0
  14. S. H. Choi, J. C. Brem, F. Barlat, K. H. Oh, 2000, Macroscopic anisotropy in AA5019A sheets, Acta Mater., Vol. 48, pp. 1853-1863 https://doi.org/10.1016/S1359-6454(99)00470-X
  15. S. H. Choi, J. H. Cho, K. H. Oh, K. S. Chung, F. Barlat, 2000, Texture evolution of FCC sheet metals during deep drawing process, Int. J. Mech. Sci., Vol. 42, pp. 1571-1592 https://doi.org/10.1016/S0020-7403(99)00091-0