DOI QR코드

DOI QR Code

Fabrication of Superconducting Transition Edge Sensors based on Ti/Au Bilayer Formation

Ti/Au 이중층을 이용한 초전도 상전이 센서 제작

  • 이영화 (한국표준과학연구원 나노소자연구단) ;
  • 김용함 (한국표준과학연구원 나노소자연구단)
  • Published : 2008.10.01

Abstract

We report on the development of transition edge sensors for x-ray detection. The sensor technology was based on the fabrication of a superconducting film on a thin membrane. A bilayer of a superconductor, Ti, and a noble metal, Au, was e-beam evaporated on a micromachined SiNx. Another Au layer was evaporated on the two side edges of the bilayer in order not to be affected by structural imperfections at the boundaries. With the method described in the present report, the superconducting transition temperature of the device was consistently achieved to near 80 mK with a sharp transition. The energy spectrum ueasured with the device provided 37 eV FWHM for 5.9 x-rays. We also discuss the design and fabrication considerations as well as the performance of the device in detail.

Keywords

References

  1. K. Tanaka, T. Morooka, K. Chinone, M. Ukibe, F. Hirayama, M. Ohkubo, and M. Koyanagi, "Strong, easy-to-manufacture, transition edge x-ray sensor", Appl. Phys. Lett., Vol. 77, No. 25, p. 4196, 2000 https://doi.org/10.1063/1.1332411
  2. H. Kudo et al., "High sensitive x-ray microcalorimeter using Bi-Au microabsorber for imaging applications", Jap. J. Appl. Phys., Vol. 43, No. 3, p. 1190, 2004 https://doi.org/10.1143/JJAP.43.1190
  3. R. Fujimoto et al., "Development of X-ray microcalorimeters for future Japanese astronomy missions", RIKEN Review, No. 47, p. 30, 2002
  4. K. D. Irwin, G. C. Hilton, D. A. Wollman, and J. M. Martinis, "X-ray detection using a superconducting transition-edge sensor microcalorimeter with electrothermal feedback", Appl. Phys. Lett., Vol. 69, p. 1945, 1996 https://doi.org/10.1063/1.117630
  5. http://constellation.gsfc.nasa.gov
  6. M. Nahum and J. M. Martinis, "Hot electron microcalorimeters as high-resolution x-ray detectors", Appl. Phys. Lett., Vol. 66, No. 23, p. 3203, 1995 https://doi.org/10.1063/1.113723
  7. M. P. Bruijn et al., "Development of an array of transition edge sensors for application in x-ray astronomy", Nucl. Instrum. Meth. Phys. Res. A, Vol. 520, p. 443, 2004 https://doi.org/10.1016/j.nima.2003.11.359
  8. K. D. Irwin, "An application of electrothermal feedback for high resolution cryogenic particle detection", Appl. Phys. Lett., Vol. 66, No. 15, p. 1998, 1995 https://doi.org/10.1063/1.113674
  9. 김상재, "초전도 SQUID자기센서의 응용", 전기전자재료, 14권, 5호, p. 33, 2001
  10. G. C. Hilton, J. M. Martinis, K. D. Irwin, N. F. Bergren, D. A. Wollman, M. E. Huber, S. Deiker, and S. W. Nam, "Microfabricated transition-edge x-ray detectors", IEEE Trans. Appl. Supercond., Vol. 11, p. 739, 2001 https://doi.org/10.1109/77.919451
  11. 박흥우, 주병권, 박윤권, 박정호, 김철주, 염상섭, 서상희, 오명환, "결정의존성 식각/기판접합을 이용한 MEMS용 구조물의 제작", 전기전자재료학회논문지, 11권, 10호, p. 815, 1998
  12. J. M. Martinis, G. C. Hilton, K. D. Irwin, and D. A. Wollman, "Calculation of $T_c$ in a normal-superconductor bilayer using the microscopic-based Usadel theory", Nucl. Instrum. Meth. Phys. Res. A, Vol. 444, p. 23, 2000 https://doi.org/10.1016/S0168-9002(99)01320-0