References
- Webb, R. L. and Kim, N.-H., 2005, Principles of enhanced heat transfer, Taylor and Francis Pub
- Wang, C. C., 1999, On the Airside Performance of Fin-and-Tube Heat Exchangers, in Heat Transfer Enhancement of Heat Exchangers, S. Kakac et al. Kluwer Academic Press, pp. 141-162
- Wang, C. C., Fu, W. L. and Chang, C. T., 1997, Heat Transfer and Friction Characteristics of Typical Wavy Fin-and-Tube Heat Exchangers, Exp. Thermal Fluid Science, Vol. 14, pp. 174-186 https://doi.org/10.1016/S0894-1777(96)00056-8
- Wang, C. C., Lin, Y. T., Lee, C. J. and Chang, Y. J., 1999, Investigation of Wavy Fin-and-Tube Heat Exchangers: A Contribution to Databank, Experimental Heat Transfer, Vol. 12, pp. 73-89
- Wang, C. C., Chang, Y. J., and Chiou, N. F., 1999, Effects of Waffle Height on the Airside Performance of Wavy Fin-and-Tube Heat Exchangers, Heat Transfer Engineering, Vol. 20, No. 3, pp. 45-56
- Saiz Jabardo, J. M., Bastos Zoghbi Filho, J. R. and Salamanca, A., 2006, Experimental Study of the Airside Performance of Louver and Wave Fin-and- Tube Coils, Exp. Thermal Fluid Science, Vol. 30, pp. 621-631 https://doi.org/10.1016/j.expthermflusci.2006.01.001
- Wongwises, S. and Chokeman, Y., 2004, Effect of Fin Thickness on Airside Performance of Herringbone Wavy Fin-and-Tube Heat Exchangers, Heat Mass Transfer, Vol. 41, pp. 147-154
- Chokeman, Y. and Wongwises, S., 2005, Effect of Fin Pattern on the Airside Performance of Herringbone Wavy Fin-and-Tube Heat Exchangers, Heat Mass Transfer, Vol. 41, pp. 642-650 https://doi.org/10.1007/s00231-004-0578-5
- Chang, W. R., Wang, C. C., Tsai, W. C. and Shyu, R. J., 1995, Airside Performance of Louver Fin Heat Exchangers, Proceedings of the 4th ASME/JSME Thermal Engineering Joint Conference, Vol. 4, pp. 367-372
- Bae, J. H., Park, M. H. and Lee, J. H., 1999, Local Flow and Heat Transfer of a 2-Row Offset Strip Fin-Tube Heat Exchanger, J. Enhanced Heat Transfer, Vol. 6, pp. 13-29 https://doi.org/10.1615/JEnhHeatTransf.v6.i1.20
- Wang, C. C., Chang, Y. P., Chi, K. Y. and Chang, Y. J., 1998, An Experimental Study of Heat Transfer and Friction Characteristics of Typical Louver Fin and Tube Heat Exchangers, Int. J. Heat Mass Transfer, Vol. 41, pp. 817-822 https://doi.org/10.1016/S0017-9310(97)00154-3
- Hatada, T., Ueda, U., Oouchi, T. and Shimizu, T., 1989, Improved Heat Transfer Performance of Air Coolers by Strip Fins Controlling Air Flow Distribution, ASHRAE Trans., Vol. 95, Pt. 2, pp. 166-170
- Wang, C. C., Chen, P. Y. and Jang, J. Y., 1996, Heat Transfer and Friction Characteristics of Convex-Louver Fin-and-Tube Heat Exchangers, Experimental Heat Transfer, Vol. 9, pp. 61-78 https://doi.org/10.1080/08916159608946514
- Wang, C. C., Tsai, Y. M., and Lu, D. C., 1998, Comprehensive Study of Convex Louver and Wavy Fin-and-Tube Heat Exchangers, J. Thermophysics Heat Transfer, Vol. 12, No. 3, pp. 423-430 https://doi.org/10.2514/2.6354
- ASHRAE Standard 41.1, 1986, Standard Method for Temperature Measurement
- ASHRAE Standard 41.2, 1987, Standard Method for Laboratory Air-Flow Measurement
- ASHRAE Standard 41.5, 1975, Standard Measurement Guide, Engineering Analysis of Experimental Data
-
Taborek, J., 1998, F and
${\theta}$ Charts for Cross-Flow Arrangements, in Heat Exchanger Design Handbook, G. F. Hewitt, Section 1.5.3, Begell House Inc - Gnielinski, V., 1976, New Equation for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, Int. Chem. Eng., Vol. 16, pp. 359-368
- Schmidt, T. E., 1949, Heat Transfer Calculations for Extended Surfaces, J of ASRE, Refrigeration Engineering, Vol. 4, pp. 351-357
- Wang, C. C., Webb, R. L. and Chi, K. Y., 2000, Data Reduction for Airside Performance of Finand- Tube Heat Exchangers, Experimental Thermal Fluid Science, Vol. 21, pp. 218-226 https://doi.org/10.1016/S0894-1777(00)00005-4
- Rich, D. G., 1973, The Effect of Fin Spacing on the Heat Transfer and Friction Performance of Multi-Row, Plate Fin-and-Tube Heat Exchangers, ASHRAE Trans., Vol. 79, Pt. 2, pp. 137-145
- Rich, D. G., 1975, The Effect of the Number of Tube Rows on Heat Transfer Performance of Smooth Plate Fin-and-Tube Heat Exchangers, ASHRAE Trans., Vol. 81, Pt. 1, pp. 307-317
- Torikoshi, K., Xi., G. N., Nakazawa, Y. and Asano, H., 1994, Flow and Heat Transfer Performance of a Plate Fin and Tube Heat Exchanger (First Report: Effect of Fin Pitch), Heat Transfer 1994, Proceedings of the 10th Int. Heat Transfer Conf., Vol. 4, pp. 411-416
- Jang, J.-Y. and Chen, L.-K., 1997, Numerical Analysis of Heat Transfer and Fluid Flow in a Three-Dimensional Wavy Fin-and-Tube Heat Exchanger, Int. J. Heat Mass Transfer, Vol. 40, No. 16, pp. 3981-3990 https://doi.org/10.1016/S0017-9310(97)00047-1
- Min, C.-K., Cho, J.-P., Oh, W.-K. and Kim, N.-H., 2004, Heat Transfer and Pressure Drop Characteristics of Heat Exchangers Having Plain Fins Under Dry and Wet Conditions, Korean J. Air-Conditioning and Refrigeration, Vol. 16, No. 3, pp. 218-229