Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Development of GMAW Process with Twin Torch for Wide Overlay using Compound Filler Plate

분말 용가재판을 사용한 광폭 오버레이용 트윈토치 GMAW 공정개발

  • Hwang, Kyu-Min (Dept. of Materials Processing Eng., Graduate School, Pukyong National Univ.) ;
  • Kim, Sung-Deok (Dept. of Materials Processing Eng., Graduate School, Pukyong National Univ.) ;
  • Jung, Byung-Ho (Division of Materials Science & Engineering, Pukyong National Univ.) ;
  • Cho, Sang-Myung (Division of Materials Science & Engineering, Pukyong National Univ.)
  • 황규민 (부경대학교 대학원 소재프로세스공학과) ;
  • 김성덕 (부경대학교 대학원 소재프로세스공학과) ;
  • 정병호 (부경대학교 신소재공학부) ;
  • 조상명 (부경대학교 신소재공학부)
  • Published : 2008.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Generally, wear plate is steel plate having improved surface contact strength and impact strength by surface hardening which is welded using materials with good corrosion resistance, wear resistance and thermal resistance property. CFP GMAW(Compound Filler Plate Gas Metal Arc Welding) is the cladding method using GMAW with the CFP, which is bound with waterglass, on the substrate. It has advantages of reducing compound powder loss, uniform penetration, and preventing hardness decrease. To develope mass production technique of CFP GMAW process for production of high quality wear plate, the method for controling shallow penetration and increasing productivity is required. In this study, twin torch method applied to CFP GMAW process for increasing productivity. And the method was developed by controling penetration control, CFP dry time, gas formation flux and water glass concentration. As a result, applying twin torch method to CFP GMAW process was possible and high quality wide bead could be made without overlap joint.

Keywords

References

  1. E.R.Baek, S.H.Ahn, J.K.Kim : Welding characteristics of the hardfacing high chromium iron alloys by the self-shielded flux cored arc welding process, Proceedings of the 1992 Spring Annual Meeting of Korean Welding and Joining Society, 1 (1992), 69-71 (in Korean)
  2. J.I.Kang : Development of Twin torch Compound Metal Arc Welding process for forming wide hardfacing bead of wear plate, Proceedings of the 2007 Autumn Annual Meeting of Korean Welding and Joining Society, 48 (2007), 91-93 (in Korean)
  3. S.S.Kang : Development of GMAW process with twin torch for wide hardfacing using compound filler plate, Proceedings of the 2007 Autumn Annual Meeting of Korean Welding and Joining Society, 48 (2007), 70-72 (in Korean)
  4. S.J.Lee : Method of Making Wear Resistant Welding Clad Plate, The Korean Intellectual Property Office, 10-2007-0002454 (2007)
  5. H.S.Ryoo : Study of Waveform Control in the High Speed $CO_2$ Welding, Proceedings of the 2004 Spring Annual Meeting of Korean Welding and Joining Society, 1 (2004), 57-59 (in Korean)
  6. R.S.Chandel : Effect of increasing deposition rate on the bead geometry of submerged arc welds, Journal of Materials Processing Technology, 72 (1997), 124-128 https://doi.org/10.1016/S0924-0136(97)00139-8
  7. C.S.Ko : The effect of heat input at turning point on penetration in the wide oscillation overlay welding, Proceedings of the 2006 Autumn Annual Meeting of Korean Welding and Joining Society, 47 (2006), 265-267 (in Korean)
  8. T.W.Jang : High Speed Welding Present and Future in Shipbuilding Assembly Stage, Journal of KWS, 22-6 (2004), 14-18 (in Korean)
  9. Chieh Fan : Microstructure change caused by $(Cr,Fe)_{23}C_6$ carbides in high chromium Fe-Cr-C hardfacing alloys, Surface & Coatings Technology, (2006), 577-580
  10. B.H.Jung : The Effect of Current on Characteristic of Stellite 12 Alloy Overlayer by PTA Process, Journal of the korean Society for Power System Engineering,, 5-3 (2001), 88-94
  11. 대한용접학회편 : 용접.접합편람, 대한용접학회, 1998, 717- 742 (in Korean)