DOI QR코드

DOI QR Code

Development of Rapeseed Precleaner and Cleaner for Biodiesel Production

바이오디젤 생산을 위한 유채종자 조정선기 및 정선기 개발

  • Cho, Nam-Hong (National Institute of Agricultural Engineering, Rural Development Administration) ;
  • Kim, You-Ho (National Institute of Agricultural Engineering, Rural Development Administration) ;
  • Yang, Gil-Mo (National Institute of Agricultural Engineering, Rural Development Administration)
  • Published : 2008.08.25

Abstract

Mechanization such as machine harvesting, precleaning, drying and cleaning for rapeseed harvested with high moisture content should be accomplished for biodiesel production. In addition, machine drying and cleaning is inevitable in the mechanization of work, just because rice should be transplanted right after harvesting rapeseed in Korea. Particularly, early harvested rapeseed with the combine have high moisture content and undesirable materials such as stalks and stones which make drying-process difficult and lower the efficiency of drying. Therefore, this study was conducted to develop precleaner and cleaner which could remove foreign substances from harvested rapeseeds. The precleaner consists of throw-in hopper, conveyor, feeding hopper, two precleaning sieves and discharging sections. Precleaning capacity was 1,505 kg/hr in shaking frequency of 370 cpm (cycles per minute) and tilt angles of between $5^{\circ}$ and $7^{\circ}$. The efficiency of precleaning was between 90.9% and 91.5%. The cleaner consists of feeding, shaking, blowing, cleaning and discharging sections. Cleaning performance was 435.4kg/hr in the number of rocking motions of 475 cpm and tilt angle of $10^{\circ}$. The ratios of cleaning, foreign substances and loss were 96.5%, 3.5% and 0.2%, respectively.

Keywords

References

  1. Aydin, C. 2002. Physical properties of hazel nuts. Biosystems Engineering 47:321-326
  2. Cahslr, S. 2005. Physical properties of rapeseed (Brassica napus oleifera L.). J. of Food Engineering 69:61-66 https://doi.org/10.1016/j.jfoodeng.2004.07.010
  3. Carman, K. 1996. Some physical properties of lentil seeds. J. of Agricultural Engineering Research 63:87-92 https://doi.org/10.1006/jaer.1996.0010
  4. Joshi, D. C., S. K. Das and R. K. Mukherji. 1993. Physical properties of pumpkin seeds. J of Agricultural Engineering Research 54:219-229 https://doi.org/10.1006/jaer.1993.1016
  5. Marcos S. J., K. Geraldine, F. A. Luiz and M. N. Andre. 2007. EU and US policies on biofuels: potential impacts on developing countries. GMF-The German Marshall Fund of the United States
  6. Peker, A. 1996. The determination of some physical properties of corn kernel. Selcuk University-The J. of Agricultural Faculty 10(12):22-65
  7. Rusinek, R and M. Molenda. 2007. Static and kinetic friction of rapeseed. Res. Agr. Eng., 53(1):14-19
  8. 고학균,금동혁,김만수,노상하,문성홍,박경규,장동일.1990. 농산가공기계학.향문사
  9. 배정환. 2006. 바이오연료의 보급전망과 사회적 비용/편익 분석.산업자원부
  10. 이상호,김충실,박재화,전순은.2005.바이오디젤 원료용 유채생산을 위한 경제성분석 및 정책적 지원방안.농림수산식품부

Cited by

  1. Effects of Roasting Condition and Storage Time on Changes in Volatile Compounds in Rapeseed Oils vol.43, pp.3, 2011, https://doi.org/10.9721/KJFST.2011.43.3.291