References
- Jun, D.-H., Kang, H.-G., Cho, H.-W. and Lee, C.-W., 1998, "Evaluation of Lateral Load Resistance Capacity of a High-rise Shear Wall Apartment Based on Elasto-plastic Analysis", Journal of the Earthquake Engineering Society of Korea, Vol. 2, No. 4, pp. 31-40
- Chang, K.-K., Seo, D.-W. and Chun, Y.-S., 2002, "The Behavior of Reinforced Concrete Coupling Elements in Wall-Dominant System", Journal of the Korea Concrete Institute, Vol. 14, No. 1, pp. 83-91 https://doi.org/10.4334/JKCI.2002.14.1.083
- Chang, K.-K., Churn, Y.-S. and Suh, D.-W., 2001, The Structural Behavior of Reinforced Concrete R/C Coupling Beams in Wall-Dominant System", Journal of the Korea Concrete Institute Annual Spring Conference, Vol. 13, No. 1, pp. 411-416
- Soong T. T. and Dargush G. F., 1997, "Passive Energy Dissipation Systems in Structural Engineering", John Wiley & Sons
- Hong, S.-G. and Lee, J.-H., 2005, "Retrofitting Device to Increase Seismic Resistant Capacity of Shear Walls", Journal of the Korea Concrete Institute Annual Autumn Conference, Vol. 17, No. 2, pp. 25-28
- Park, J.-H. and Kim, G.-H., 2007, "Vibration Control of Shear Wall-frame System using Energy Dissipaation Devices", Proceeding of the KSNVE Annual Spring Conference, KSNVE07S-21-03
- Xilin, L., Xiaohan, W. and Liang, M., 1997, "Seismic Behavior of a New Type of Seismic Energy Dissipation Shear Wall System", Structural Engineering and Mechanics, Vol. 5, No. 2, pp. 167-175 https://doi.org/10.12989/sem.1997.5.2.167
- Xilin, L. and Xiaohan, W., 2000, "Study on a New Shear Wall System with Shaking Table Test and Finite Element Analysis", Earthquake Engineering and Structural Dynamics, Vol. 29, pp. 1425-1440 https://doi.org/10.1002/1096-9845(200010)29:10<1425::AID-EQE965>3.0.CO;2-A
- Tony, H., Jose. R. and John, B. M., 2003, "Seismic Performance of Precast Reinforced and Prestressed Concrete Walls", J. Struct. Engrg., Vol. 129, No. 3, pp. 286-296 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(286)
- Paulay, T. and Priestley, M. J. N., 1992, "Seismic Design of Reinforced Concrete and Masonry Buildings", Wiley, New York
- John, W. W., Associate Member, ASCE, 1994, "New Methodology for Seismic Design of RC Shear Walls", Journal of Structural Engineering, Vol. 120, No. 3, pp. 863-884 https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(863)
- Priestley, M. J. N., Calvi, G. M. and Kowalsky, M. J., 2007, "Displacement-based Seismic Design of Structures"
- Vulcano, A., Bertero, V. V. and Colotti, V., 1988, "Analytical Modeling of RC Structural Walls", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, Vol. 6, pp. 41-46
- Menegotto, M. and Pinto, E., 1973, "Method of Analysis for Cyclicallly Loaded Reinforced Concrete Plane Frames Including Changes in Geometry and Non-elastic Behavior of Elements Under Combined Normal Force and Bending", Proceedings, IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-defined Repeated Loads, Lisbon, pp. 15-22
- Filippou, F. C., Popov, E. G. and Bertero, V. V., 1983, "Effects of Bond Deterioration on Hysteretic Behavior of Reinforced Concrete Joints", EERC Report No.UCB/EERC-83/19, Earthquake Engineering Research Center, University of California, Berkeley, Calif., p. 184
- Ko, D.-W. and Lee, H.-S., 2007, "Correlation of Experimental and Analytical Inelastic Responses of 1:12 Scale Irregular High-rise RC Buildings", Journal of the Computational Structural Engineering Institute of Korea, Vol. 11, No. 2, pp. 95-104 https://doi.org/10.5000/EESK.2007.11.2.095