참고문헌
- Beck, M. and Hinterhofer, K., 1998, "Direct High Dynamic Flow Measurement in the Exhaust of Combustion Engines PEUS-Systems," SAE paper, No. 9808801
- Yassine, M. K., Marji, M. S., Berndt, R. W., and Laymac, T. D., 2003, "Parameters Affecting Direct Vehicle Exhaust Flow Measurement," SAE Paper, No. 2003-01-781
- Silvis, W., Williamson, J., and Kreft, N., 2003, "DVE -Direct Vehicle Exhaust Flow Measurement Using Head-type Flow meters," SAE Paper, No. 2003-01-0782
- Hardy, J. E., McKnight, T. E., and Hylton, J. O., and Joy, R. D., 1999, "Real-Time Measurement of Vehicle Exhaust Gas Flow," 4th International Symposium on Fluid Flow Measurement, Report Number ORNL/CP- 102550 Denver, Colorado
- Yamagishi, Y., 2000, "The MDLT-1302T Partial Flow Dilution Tunnel for Transient Test Cycle PM Sampling," Horiba Technical Report
- Yamagishi, Y. and Ohtsuki, S., 2000, "Tunnel Vision - A Particulate Matter Sampling System Using a Partial Flow Dilution Method Designed to Perform Sampling during a Transient Test Cycle," Testing Technology International, pp 95-99
- Rahim, R. A., Fea, P. J., and San, C. K., 2005, "Optical Tomography Sensor Configuration Using Two Orthogonal and Two rectilinear Projection Arrays," Flow Measurement and Instrumentation, Vol. 16, pp. 327-340 https://doi.org/10.1016/j.flowmeasinst.2005.06.001
- Yang, W. Q. and Liu, S., 2000, "Role of Tomography in Gas/Solids Flow Measurement," Flow Measurement and Instrumentation, Vol. 11, pp. 237-244 https://doi.org/10.1016/S0955-5986(00)00023-6
-
Rosemount Product Data Sheet, 1998, Diamond II-Annubaar
$\circledR$ bar Primary Flow Element, Dieterich, A Subsidiary of Rosemount Inc, 00813-0100-4760 Rev. DA 11/98, USA - Wayne, W. S., Corrigan, E. R., Atkinson, R. J., Clark, N., and Lyons, D. W., 2001, "Measuring Diesel Emissions with a Split Exhaust Configuration," SAE paper, No. 2001-01-1949
- Kim, K. I., Kim, M. C., Park, D. S., and Lee, C. H., 2007, "A Study on Improvement of an Annular Bar Type D2P Flow Meter for Measuring Exhaust Flow Rate of Diesel Engine," 2007 Spring conference proceedings, Vol. 1, pp. 489-494
- Lee, C. H., Kim, K. I., Kim, M. C., and Park, D. S., 2007, "A Study on Flow Characteristics of a Separate Triangular Bar Differential Pressure Flow Meter for Measuring Exhaust Flow Rate of Diesel Engine," Journal of the Korean Society for Railway, Vol. 9, No. 6, pp. 563-568
- ISA 1932 (ISO-5167-3), 2003, Measurement of Fluid Flow by Means of Pressure Differential Devices Inserted in Circular-Cross Section Conduits Running Full- Part3: Nozzles and Venturi Nozzles, International Organization for Standardization, Geneva
- Nakamura, H., Kihara, N., Adachi, M., and Ishida, K., 2002, "Development of a Wet-Based NDIR and Its Application to On-Board Emission Measurement System," SAE Paper, No. 2002-01-0612
- Lee, C. H., 2005, "A Study on the Automatic Measurement of Swirl Generated from Intake Port of Engine Cylinder Head Using an I-IEEE-1394 Camera and Step Motors," Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 6, pp. 88-94