DOI QR코드

DOI QR Code

An Intelligent Fault Detection and Service Restoration Scheme for Ungrounded Distribution Systems

  • 발행 : 2008.09.30

초록

Electric load components have different characteristics according to the variation of voltage and frequency. This paper presents the load modeling of an electric locomotive by the parameter identification method. The proposed method for load modeling is very simple and easy for application. The proposed load model of the electric locomotive is represented by the combination of the loads that have static and dynamic characteristics. This load modeling is applied to the KTX in Korea to verify the effectiveness of the proposed method. The results of proposed load modeling by the parameter identification follow the field measurements very exactly.

키워드

참고문헌

  1. I. Zamora, A. J. Mazon, K. J. Sagastabeitia, and I. Albizu, "Application of superimposed voltage in the detection of faults in resonant distribution systems," in IEEE Bologna PowerTech Conference, 2003
  2. J. Gong, Y. Zhou, N. Wang, and L. Zhang, "Discussion of principles and traits of methods for a single-phase short circuit to ground feeder protection in ineffectively grounded power systems," Power Systems Engineering, vol. 20, no. 1, pp. 31-33, Jan. 2004
  3. T. Genji, M. Shimamoto, and K. Kishida, "Development of a high-speed switching system for distribution networks," Power Delivery, IEEE Transations, vol. 13, no. 1, pp. 186-193, Jan.1998 https://doi.org/10.1109/61.660877
  4. D. Hou and N. Fischer, "Deterministic high-impedance fault detection and phase selection on ungrounded distribution systems," in Power Systems Conference: Advanced Metering, Protection, Control, Communication, and Distributed Resources, 2006
  5. X. Yang, S.-I. Lim, S.-J. Lee, and M.-S. Choi, "Communication-based fault handling scheme for ungrounded distribution system," Energy and Power Systems (EPS2006), Mar. 2006
  6. H. Zhang, "Injection current based method for fault location in neutral isolated power system," Automation of Electric Power Systems, vol.28 no.3 Feb. 2004
  7. Z. Pan, H. Zhang, F. Zhang, and Z. Sang, "Analysis and modification of signal injection based fault line selection protection," Automation of Electric Power Systems, vol.31 no.4 Feb. 2007
  8. X. Yang, M.-S. Choi, and S.-J. Lee, "A fault section detection method for ungrounded systems based on phase angle comparison of zero-sequence current," in KIEE summer conference, 2007
  9. Q. Guan, M.-S. Choi, and S.-S. Han, "IEC61850 based FRTU development scheme," in KIEE summer conference, 2007

피인용 문헌

  1. Security Protocols Against Cyber Attacks in the Distribution Automation System vol.25, pp.1, 2010, https://doi.org/10.1109/TPWRD.2009.2021083
  2. An Optimal Composition and Placement of Automatic Switches in DAS vol.28, pp.3, 2013, https://doi.org/10.1109/TPWRD.2013.2239314