초록
본 논문은E-PON용 버스트모드 광 수신소자를 개발하여 FTTH의 상용화에 기여하고자 연구되었다. 수신소자는 1.25 Gb/s 데이터 전송속도에서 E-PON의 10, 20 Km OLT Rx규격에 만족할 수 있도록 수신감도를 향상 시키기 위해 정전용량을 최소화하여 제작하였다. 수신감도는 비트 오류율이 $10^{-12}$이고 PRBS가 $2^5-1$일 때 -26 dBm, loud/soft ratio는 23 dB으로 측정되었다. Preamble time과 guard time은 각각 102.4 ns(128 bit)로 설정하였다. 일반적으로 광 수신소자에 주로 사용되는 정전용량이 0.53 pF인 포토다이오드와 정전용량이 최소화된 0.26 pF인 포토다이오드를 비교한 결과 정전용량이 0.26 pF인 포토다이오드로 제작된 버스트모드 광 수신소자 가 수신감도는 0.7 dBm, 대역폭은 190 MHz 더 향상되었다.
This study was carried out to commercialize FTTH by developing a burst mode optical receiver for E-PON. The optical receiver was manufactured by minimizing the capacitance of a photodiode to improve sensitivity for meeting 10, 20 km OLT Rx standard of E-PON at the transmission speed of 1.25 Gb/s. When bit-error ratio is $10^{-12}$ and PRBS is $2^5-1$, sensitivity is -26 dBm, loud/soft ratio is 23 dB. Both preamble time and guard time were set to 102.4 ns (128 bit). After comparing a photodiode whose capacitance is 0.53 pF with another photodiode whose capacitance has been minimized to 0.26 pF, we could see that sensitivity improved to 0.7 dBm and so did bandwidth to 190 MHz of burst mode for the optical receiver manufactured by the photodiode whose capacitance is 0.26 pF.