DOI QR코드

DOI QR Code

Poling Quality Evaluation of Periodically Poled Lithium Niobate Using Diffraction Method

  • Received : 2008.08.13
  • Accepted : 2008.09.08
  • Published : 2008.09.25

Abstract

We demonstrated a simple way of evaluating the duty cycle error in periodically polled lithium niobate(PPLN) based on the method of binary phase diffraction grating. To demonstrate this method, -Z face etched PPLN of desired periods were fabricated by the standard electric field poling technique. The etched PPLN was considered as a surface-relief binary phase grating. The diffraction patterns were recorded for different spatial locations along the length of the sample. The experimentally observed efficiencies of the diffracted orders were compared with the theoretically calculated values to estimate the duty cycle error.

Keywords

References

  1. M. M. Fejer, G. A. Magel, D. H. Jundt, and R. L. Byer, "Quasi-phase-matched second harmonic generation: tuning and tolerances," IEEE J. Quantum. Electron., vol. 28, no. 11, pp. 2631-2654, 1992 https://doi.org/10.1109/3.161322
  2. C.-S. Kee , J. Lee , and Y. L. Lee, "Characteristics of Solc filters in $X^{(2)}$ nonlinear photonic crystals," J. Opt. Soc. Korea, vol. 11, no 3, pp. 130-132, 2007 https://doi.org/10.3807/JOSK.2007.11.3.130
  3. I. M. Jung and D.-S. Shin, "Efficient optical intensity modulator based on the electrically tunable $LiNbO_3$ reflection grating for analog fiber-optic links," J. Opt. Soc. Korea, vol. 11, no. 1, pp. 1-5, 2007 https://doi.org/10.3807/JOSK.2007.11.1.001
  4. A. Rosenfeldt and M. Florsheimer, "Nondestructive remote imaging of ferroelectric domain distributions with high three-dimensional resolution," Appl. Phys. B., vol. 73, no. 5-6, pp. 523-529, 2001 https://doi.org/10.1007/s003400100670
  5. V. Dierolf and C. Sandmann, "Inspection of periodically poled waveguide devices by confocal luminescence microscopy," Appl. Phys., B., vol. 78, no. 3-4, pp. 363-366, 2004 https://doi.org/10.1007/s00340-003-1377-2
  6. T. J. Yang, V. Gopalan, P. J. Swart, and U. Mohideen, "Direct Observation of Pinning and Bowing of a Single Ferroelectric Domain Wall," Phys. Rev. Lett., vol. 82, no. 20, pp. 4106-4109, 1999 https://doi.org/10.1103/PhysRevLett.82.4106
  7. M. Müller, E. Soergel, K. Buse, C. Langrock, and M. M. Fejer, "Investigation of periodically poled lithium niobate crystals by light diffraction," J. Appl. Phys., vol. 97, no. 4, pp. 044102, 2005 https://doi.org/10.1063/1.1849818
  8. J. W. Goodman,"Introduction to Fourier Optics," $2^{nd}$ ed., (McGraw-Hill, Singapore, 1996)
  9. D. C. Oshea, T. J. Suleski, A. D. Kathman, and D. W. Prathes, "Diffractive Optics: Design, Fabrication and Test," SPIE Publication, 2003
  10. M .J. Jin, O. Y. Jeon, B. J. Kim, and M. Cha, "Fabrication of Periodically Poled Lithium Niobate Crystal and Poling-Quality Evaluation by Diffraction Measurement," J. Korean Phys. Soc., vol. 47, pp. S336-S339, 2005 https://doi.org/10.3938/jkps.47.336
  11. J. H. Ro, Ph.D. thesis, Pusan National University, 2001
  12. M. J. Missey, S. Russell, V. Dominic, R. G. Batchko, and K. L. Schepler, "Real-time visualization of domain formation in periodically poled lithium niobate," Opt. Express., vol. 6, no. 10, pp. 186-195, 2000 https://doi.org/10.1364/OE.6.000186
  13. V. Gopalan, Q. X. Jia, and T. E. Mitchell, "In situ video observation of $180^{\circ}$ domain kinetics in congruent $LiNbO_3$ crystals," Appl. Phys. Lett., vol. 75, no. 16, pp. 2482-2484, 1999 https://doi.org/10.1063/1.125055
  14. C. L. Sones, S. Mailis, W. S. Brocklesby, R. W. Eason, and J. R. Owe, "Differential etch rates in z-cut $LiNbO_3$ for variable $HF/HNO_3$concentrations," J. Material Chem., vol. 12, pp. 295-298, 2002 https://doi.org/10.1039/b106279b
  15. M. M. Sanchezlopez, J. Cos, J. A. Davis, D. A. Miller, and I. Moreno, "Fourier analysis of harmonic frequency transmission dielectric structures," Appl. Opt., vol. 44, no. 18, pp. 3774-3783, 2005 https://doi.org/10.1364/AO.44.003774
  16. G. D. Miller, Ph.D. thesis, Stanford University, 1998

Cited by

  1. Fabrication of Thick Periodically-poled Lithium Niobate Crystals by Standard Electric Field Poling and Direct Bonding vol.14, pp.4, 2010, https://doi.org/10.3807/JOSK.2010.14.4.420
  2. Engineering of effective second-order nonlinearity in uniform and chirped gratings vol.29, pp.10, 2012, https://doi.org/10.1364/JOSAB.29.002929
  3. Tailoring and tuning of the broadband spectrum of a step-chirped grating based frequency doubler using tightly-focused Gaussian beams vol.21, pp.24, 2013, https://doi.org/10.1364/OE.21.029847
  4. Poling Quality Evaluation of Optical Superlattice Using 2D Fourier Transform Method vol.17, pp.20, 2009, https://doi.org/10.1364/OE.17.018241
  5. Design, fabrication and characterization of a specially apodized chirped grating for reciprocal second harmonic generation vol.23, pp.4, 2015, https://doi.org/10.1364/OE.23.005183
  6. Poling Quality Enhancement of PPLN Devices Using Negative Multiple Pulse Poling Method vol.15, pp.2, 2011, https://doi.org/10.3807/JOSK.2011.15.2.182
  7. Design and development of low-cost room temperature electric field poling system for the fabrication of quasi-phase matching devices vol.91, pp.3, 2018, https://doi.org/10.1007/s12043-018-1616-z
  8. Studies on the effect of duty cycle variation in Fibonacci-based quasi-phase matching devices vol.65, pp.16, 2018, https://doi.org/10.1080/09500340.2018.1464221