대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제32권11호
  • /
  • Pages.1022-1027
  • /
  • 2008
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

비선형 유한요소해석을 이용한 웨더스트립의 특성예측

Prediction for Weather Strip Using Nonlinear Finite Element Analysis

  • 장왕진 (인제대학교 대학원) ;
  • 한창용 (인제대학교 대학원) ;
  • 우창수 (한국기계연구원 나노역학팀) ;
  • 이성범 (인제대학교 고안전차량핵심기술연구소)
  • 발행 : 2008.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

TPE is used as alternative for rubber, the best example is the weather strip for automobile. The nonlinear material properties of weather strip were important to predict the behaviors of weather strip. Uniaxial tension and equi-biaxial tension tests were performed to achieve the nonlinear material constant and stress-strain curves. The nonlinear material constant of weather strip is evaluated by using the nonlinear finite element analysis. In this paper, the prediction for weather strip is analyzed by using commercial finite element program, ANSYS. The nonlinear finite element analysis of weather strip is executed to predict the behavior of weather strip for automobile.

키워드

참고문헌

  1. Ghoreishy, M. H. R., Razavi-nouri, M. and Naderi, G., 2005, "Finite Element Analysis of a Thermoplastic Elastomer Melt Flow in the Metering Region of a Single Screw Extruder," Computational Material Sci., Vol. 34, pp. 389~396 https://doi.org/10.1016/j.commatsci.2005.01.011
  2. Kim, H. Y., Jung, K. J. and Kim, H., 2001, "Development of on Exclusive Non-Linear Analysis Program for the Design of Door Seal," Autumn Conference Proceeding KSAE, pp. 1009~1015
  3. Kim, D. J., Kim, W. D., Kim, W. S. and Lee, Y. S., 2003, "A Study on the Equi-biaxial Tension Test of Rubber Material," KSME, pp. 425~430
  4. Woo, C. S., Park, H. S. and Lee, G. A., 2007, "Material Test and Forming Analysis of Urethane Rubber," KSME, pp. 2654~2659
  5. Kim, W. D., Kim, W. S., Kim, D. J., Woo, C. S. and Lee, H. J., 2004, "Mechanical Testing and Nonlinear Material Properties for Finite Element Analysis of Rubber Components," KSME, Vol. 28, No. 6, pp. 848~859.er," Computational Material Sci., Vol. 34, pp. 389~396 https://doi.org/10.3795/KSME-A.2004.28.6.848
  6. Computational Material Sci., Vol. 34, pp. 389~396 https://doi.org/10.1016/j.commatsci.2005.01.011

피인용 문헌

  1. An experimental study and finite element analysis of weatherstrip vol.12, pp.1, 2011, https://doi.org/10.1007/s12541-011-0012-0
  2. Kinetic finite element model to optimize sulfur vulcanization: Application to extruded epdm weather-strips vol.53, pp.2, 2012, https://doi.org/10.1002/pen.23270
  3. The Influence of Soft/Hard Segment Composition and Content on the Abrasion Resistance of Polyurethane Coating Agents vol.22, pp.5, 2014, https://doi.org/10.7467/KSAE.2014.22.5.005
  4. Design Optimization of Over-slam Bumper for Moving Part Over-travel vol.22, pp.5, 2014, https://doi.org/10.7467/KSAE.2014.22.5.066
  5. Effects of polyurethane-based coating agent compositions on their abrasion resistance and friction coefficient vol.659, pp.1, 2017, https://doi.org/10.1080/15421406.2018.1449795