참고문헌
- 금기정, 김홍상, 김명수, 박영진(2002) 교통안전 증진을 위한 국도 곡선부에서의 운전자 시각 행태 분석, 대한교통학회지, 대한교통학회, 제20권, 제3호
- 김용석(2004) 긴 직선-곡선 연결선형에서 운전자 주행행태에 관한 현장조사 연구, 대한교통학회지, 대한교통학회, 제22권, 제7호
- 김용석, 조원범, 정소영(2005) 도로 설계일관성 평가를 위한 복합선형 구간 주행속도 조사, 대한토목학회 정기학술대회, 대한토목학회
- 박영진(2002) 개별차량의 운전형태를 이용한 위험도 평가기법 개발, 박사학위논문, 서울대학교
- 이점호(2000) 설계일관성 분석을 통한 도로 선형 설계의 적정성 평가 연구, 박사학위논문, 서울시립대학교
- 전우훈, 조혜진(2006) 시선유도시설의 성능에 따른 운전자 반응 형태 연구, 대한토목학회 정기학술대회, 대한토목학회
- 정봉조(2002) 운전자 작업부하를 고려한 최장 허용 직선길이 결정에 관한 연구, 대한교통학회지, 대한교통학회, 제20권, 제2호
- 정준화, 박영진, 박창호(2000) 속도에 따른 평면 곡선부 설치 방안 연구, 대한토목학회논문집, 대한토목학회, 제20권, 제5-D호, pp. 537-547
- 정준화(2001) 주행속도를 이용한 도로의 평면선형 안전성 평가 모형 개발, 박사학위논문, 서울대학교
- 최재성, 이점호(1995) 4차선 도로의 설계요소에 대한 교통안전성 분석 연구, 대한토목학회논문집, 대한토목학회, 제15권, 제3호, pp. 511-522
- 최재성(1998) 도로선형에 대한 설계일관성 평가 모형의 개발, 대한교통학회지, 대한교통학회, 제16권, 제4호
- 하태준, 박제진, 김유철(2003) 가속도를 고려한 도로의 설계일관성 평가기법에 관한 연구, 대한교통학회지, 대한교통학회, 제21권, 제1호
- 하태준, 박제진, 오영욱, 강정규(2008) 3차원 시거를 이용한 도로 일관성 평가에 관한 연구, 대한교통학회지, 대한교통학회, 제26권, 제3호
- 한국건설기술연구원(2007) 도로선형 및 노면 안전성분석 모형 개발, RoSAS
- Al-Masaeid, H.R., M. Hamed, M. Abou-Ela, and Ghannam (1995) Consistency of Horizontal Alignment for Different Vehicle Classes, TRR 1500
- Federal Highway Administration (2000)
- Fitzpatrick, Krammes, and Fambro (1997) Operating Speed and Posted Speed Relationships, ITE Journal
- Elefteriadou, F.L., Harwood, D.W., Collins, J.M.,McFadden, J., Anderson, I.B., Krammes, R.A., Irizarry, N., Parma, K.D., Bauer, K.M., and Passetti, K. (2000) Speed Prediction for Two-Lane Rural Highways, Report FHWA-RD-99-171, USDOT, FHWA
- Gibreel, G.M., Easa, S.M., Hassan, Y., and El-Dimeery, I.A. (1999) State of the art of high way geometric design consistency, Journal of Transportation Engineering, Vol. 125, No. 4
- Glennon, J.C., Neuman, T.R., and Leish, J.E. (1983) Safety and Operational Considerations for Design of Rural Highway Curves, Report FHWA/RD- 86/ 035, USDOT, FHWA
- Hassan, Y., Easa, S.M., and Abd El Halim, A.O. (1997) Design considerations for combined highway alignments, Journal of Transportation Engineering, Vol. 123, No. 1 https://doi.org/10.1061/(ASCE)0733-947X(1997)123:1(1)
- Hassan, Y., Easa, S.M., and Abd El Halim, A.O. (2000) Modeling Headlight Distance on 3D Hihghway Alignment., Transportation Resarch Record 1579
- Hirsh, M. (1987) Probabilistic approach to consistency in geometric design, Journal of Transportation Engineering, Vol. 113, No. 3
- Islam, M.N. (1994) Evaluation of Design Consistency of Two-Lane Rural Highway, ITE Journal
- Krammes, R.A. (1997) Interactive Highway Safety Design Model : Design Consistency Module, Public Roads
- Krammes, R.A., Brackett, R.Q., Shafer, M.A., Ottesen, J.L., Anderson, I.B., Fink, K.L., Collins, K.M., Pendleton, O.J., and Messer, C.J. (1995) Horizontal Alignment Design Consistency for Rural Two Lane Highway, FHWA- RD-94-034, FHWA, USDOT
- Krebs, H.G. and Kloeckner, J.H. (1997) Investigations of the Effect of Highway and Traffic Conditions Outside Built-Up Areas on Accident Rates, Research Road Construction and Road Traffic Technique, Minister of Transportation, Bonn, Germany, Vol. 233, pp. 1-63
- Lamm, R., Guenther, A.K., and Chouelrl, E.M. (1995) Safety Module for Highway Design, TRR 1512
- Lamm, R. and Choueiri, E.M. (1987) Rural Roads Speed Inconsistencies Design Methods, Research Report for the University of New York, USA
- Lamm, R., Psarianos, B., and Mailaender, T. (1999) Highway Design and Traffic Safety Engineering Handbook, McGraw-Hill
- Lamm, R., Coureiri, E., and Mailaender, T. (1991) Side Friction Demand Versus Side Friction Assumed for Curve Design on Two-Lane Rural Highway, TRB 1303
- Lamm, R. et al. (1988) Possible Design Procedure to Promote Design Consistency in Highway Geometric Design on Two lane Rural Roads, TRR 1195, pp. 117-119
- Leisch, J.E. and Leisch, J.P. (1997) New Concepts in Design Speed Application, Transportation Research Board 631, Transportation Research Board
- Leutzbach, W. and Zoellmer, J. (1989) Relationship between Traffic Safety and Design Element., Research Road Construction and Road Traffic Technique, Vol. 545, Minister of Transportation, Bonn, Germany
- Lidia Zakowska (1997) The Effect of Road Visualization Method on Drivers's Road View Perception, Cracow University of Technology
- McLean, J.R. (1978) Speeds on Curves : Regreesion Analysis. International Report, Australian Road Research Board, Melbourne, Australia
- Messer, C.J. (1979) Highway Geometric Design Consistency Related to Driver Expectancy (Vol II), FHWA- RD- 79-35
- Messer, C.J. (1981) Methodology for Evaluation Geometric Design Consistency, TRR 757
- Shaun Bidulka, Tarek Sayed, and Yasser Hassan (2002) Influence of Vertical Alignment on Horizontal Curve Perception Phase : Modeling Perceived Radius, Transportation Research Record 1796
- Smith, B.L. and Lamm, R. (1994) Coordination of Horizontal and Vertical Alinement with Regard to Highway Esthetics, Transportation Research Record 681, Transportation Research Board, Washington, D.C., pp. 77-88
- Spacek (1987) Superelevation Rates in Tangents and Curves, ETH Zurich, Institute for Traffic Planning, Highway and Railroad Construction, Research Report 22/79 of the Swiss Association of Road Specialists, Zurich, Switzerland
- Taiganidis and Kanellaidis, G. (1999) Approximate Perspective Design of Roads, Journal of Transportation Engineering
- Thomas Janikula and Norman W. Garrick (2002) Three- Dimensional Visualization Approach to Illustrating Esthestic Concepts for Highway Design, Transportation Research Record 1796
- Voigt, A.P. and Bared, J.G. (1998) Accident Model for Two-Lane Rural Roads: Segment and Intersections, FHWA- RD-98-133
- Woodlridge, M.D. (1994) Design consistency and driver error, Presented at 72nd Annual Meeting of TRB, Paper No. 930722, National Research Washington DC
- Zegeer, C.V., Reinfurt, D., Neuman, T., Stewart, R., and Council, F. (1991) Safety Improvements on Horizontal Curves for Two-Lane Rural Road Informational Guide, FHWA-RD-90-074, FHWA