Journal of Advanced Marine Engineering and Technology

  • 제32권5호
  • /
  • Pages.670-676
  • /
  • 2008
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

나노금속분말 윤활제를 적용한 산업용 디젤엔진의 성능

The Performance of a Diesel Engine Using Lubricant Containing Nano-metal Powder

  • 발행 : 2008.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A diesel engine requires a high Performance of lubrication because of the extreme conditions such as high temperature and pressure during combustion process in a cylinder. Many researches to improve the lubrication performance on the extreme condition have been executed. The lubricant oil suspended with nano-metal particles is the one of the measure. In this study, the nano-lubricant oil is applied on a commercial diesel engine, and the engine performance is tested. The results show the increase of maximum torque and the decrease of cylinder pressure, exhaust gas temperature, CO emission.

키워드

참고문헌

  1. Bhushan, B. and Gupta, B. K., Handbook of Tribology, McGraw Hill, 1991
  2. Hardy, w. b. and Doubleday, I., 'Boundary Lubrication-The Paraaffin Series,' Proc. Roy. Soc. A, Vol. 102, pp.550-547, 1922
  3. Bowden, F. P. and Tabor, D., The Friction and Lubrication of Solids, Clarendon Press, pp.176-199, 1958
  4. W.J, Bartz, J. Oppelt, 'Lubricating Effectiveness of Oil-Soluble Additives and Molibdenum Disulfide Dispersed in Mineral Oil, 'Lubr. Eng., Vol.36, pp579-585, 1980
  5. G. F. Reick, 'Energy-Saving Lubricants Containing Colloidal PTFE, 'Lubr. Eng., Vol.38, pp.635-65, 1982
  6. C. Cusano and H. E. Sliney, 'Dynamics of Solid Dispersions in Oil During the Lubrication of point Contacts, partI- Graphite, 'ASLE Trans., Vol.25, No.2, pp.183-189, 1982 https://doi.org/10.1080/05698198208983079
  7. A. S. Kuzharov and O. V. Fisenko, 'Copper-containing Additives and Tribological Behavior of Chiatim-201 Grease,' Soviet Jr. of Friction and Wear, Vol.13, No.2, pp.73-77, 1992
  8. T. I. Nazarenko, N. N. Lozentsova, G. G. Shchegolev and Yu. P.Toporov, 'On Lubricating Properties of Oil with Copper-Containing Additives,' Soviet Jr. of Friction and Wear, Vol.13, No.2, pp.78-81, 1992
  9. S. Gunsel and F. Lockwood, 'The Influence of Copper-Containing Addi- tives on Oil Oxidation and Corro- sion,' Tribology Trans.(STLE), Vol.38, No.3, pp.485-496,1995 https://doi.org/10.1080/10402009508983434
  10. G. P. Shpenkov, Physical Chemistry of Friction, Minsk, 1991
  11. M. V. Astakhov and V. A. Mouratov, 'Nickel Fine Particle's Adsorptive- Catalytic Mechanism,' Wear, Vol. 176, pp.61-65, 1994 https://doi.org/10.1016/0043-1648(94)90197-X
  12. 안효석, 이성철, '첨가제에 함유된 미세한 구리합금입자의 마찰 및 마모 특성,' 한국윤활학회지, 제12권 제2호, pp.32-40, 1996

피인용 문헌

  1. The effect of lubricant containing diamond nano-powder on performance vol.38, pp.9, 2014, https://doi.org/10.5916/jkosme.2014.38.9.1039