한국CDE학회논문집 (Korean Journal of Computational Design and Engineering)

  • 제13권2호
  • /
  • Pages.131-138
  • /
  • 2008
  • /
  • 2508-4003(pISSN)
  • /
  • 2508-402X(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

디자인 피쳐에 의존하지 않는 솔리드 모델의 수정

Modification of Solid Models Independent of Design Features

  • 우윤환 (한성대학교 기계시스템공학과)
  • 발행 : 2008.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

With the advancements of the Internet and CAD data translation techniques, more CAD models are transferred from a CAD system to another through the network and interoperability is getting a common word in the CAD industry. However, when a CAD model is translated for an incompatible system into a neutral format such as STEP or IGES, its precious feature information is lost. When this feature information is lost, the advantage of feature based modeling is not valid any longer, and modification for the model is purely dependent on geometric and topological manipulations. However, the capabilities of the existing methods to modify these feature-independent models are limited as the modification involves a topological change in the model. To address this issue, we present a volumetric method to modify the solid models in neutral format. First, this method selectively decomposes the solid model to separate the portion of interest called feature volume. Next, the designer modifies the feature volume without concerning a topological change. Finally, the feature volume is united with the original solid model to complete the modification process. The results of test cases are presented to attest the usefulness of the proposed method.

키워드

참고문헌

  1. Pratt, M. J. et al., "Towards Standardized Exchange of Parameterized Feature-based CAD Nodels", Computer Aided Design, Vol. 37, No. 12, pp. 1251-1265, 2005 https://doi.org/10.1016/j.cad.2004.12.005
  2. 문두환, 한순흥, "매크로 파라메트릭 방법론을 이용한 CAD모델의 교환", 한국CAD/CAM학회 논문집, 제6권, 제4호, pp.254-262, 2001
  3. 문두환, 김병철, 한순흥, "피처트리와 매크로파일을 이용하는하이브리드 파라메트릭 번역기", 한국 CAD/CAM학회 논문집, 제7권, 제4호, pp.240-247, 2002
  4. ACIS$^{\circledR}$ 3D Modeling Kernel Online Help, Spatial Corp, http://www.spatial.com
  5. Sakuri, H. and Dave, P., "Volume Decomposition and Feature Recognition, Part II: Curved Objects", Computer Aided Design, Vol. 28, No. 6/7, pp. 519-537, 1996 https://doi.org/10.1016/0010-4485(95)00067-4
  6. Woo, Y. and Sakurai, H., "Recognition of Maximal Features by Volume Decomposition", Computer Aided Design, Vol. 34, No. 3, pp. 195-207, 2002 https://doi.org/10.1016/S0010-4485(01)00080-X
  7. Shah, J., Shen, Y. and Shirur, A., "Determination of Machining Volumes from Extensible Sets of Design Features", In: Shah, J., Mantyla, M., Nau, D., editors. Advances in Feature based Manufacturing. Amsterdam:Elsevier; pp. 129-157, 1994
  8. Wang, E. and Kim, Y., "Form Feature Recognition Using Convex Decomposition: Results Presented at the 1997 ASME CIE Feature Panel Session", Computer Aided Design, Vol. 30, No. 13, pp. 983-989, 1998 https://doi.org/10.1016/S0010-4485(98)00058-X
  9. Lu, Y., Gadh, R. and Tautges, T., "Feature based Hex Meshing Methodology: Feature Recognition and Volume Decomposition", Computer Aided Design, Vol. 33, No. 3, pp. 221-232, 2001 https://doi.org/10.1016/S0010-4485(00)00122-6
  10. Kailash, S., Zhang, Y. and Fuh, J., "A Volume Decomposition Approach to Machining Feature Extraction of Casting and Forging Component", Computer Aided Design, Vol. 33, No. 8, pp. 605-617, 2001 https://doi.org/10.1016/S0010-4485(00)00107-X
  11. Litte, G., Clark, D., Corney, J. and Tuttle, J., "Delta- Volume Decomposition for Multi-sided Components", Computer Aided Design, Vol. 30, No. 9, pp. 695-705, 1998 https://doi.org/10.1016/S0010-4485(98)00023-2
  12. Woo, Y., "Fast Cell-based Decomposition and Applications to Solid Modeling", Computer Aided Design, Vol. 35, No. 11, pp. 969-977, 2003 https://doi.org/10.1016/S0010-4485(02)00144-6
  13. Venkataraman, S. and Sohoni, M., "Blend Recognition Algorithm and Applications", Proceedings of ACM Solid Modeling Conference, Ann Arbor, MI, USA, pp. 99-108, 2001
  14. Zhu, H. and Meng, C. H., "B-Rep Model Simplification by Automatic Fillet/Round Suppressing for Efficient Automatic Feature Recognition", Computer Aided Design, Vol. 34, No. 2, pp. 109-123, 2002 https://doi.org/10.1016/S0010-4485(01)00056-2