References
- Vance, J. M., "Rotordynamics of Turbomachinery," John Wiley & Sons, New York, 1988
- Pietra, L. D. and Adiletta, G., "The Squeeze Film Damper over Four Decades of Investigations. Part I: Characteristics and Operating Features," The Shock and Vibration Digest, Vol. 34, No. 1, pp. 3-26, Jan. 2002
- Rabinowitz, M. D., and E. J. Hahn, "Steady State Performance of Squeeze Film Damper Supported Flexible Rotors," Journal of Engineering for Power, Trans. ASME, Vol. 99, No. 4, pp. 552- 558, 1977 https://doi.org/10.1115/1.3446550
- Gunter, E. J., L. E. Barrett, and P. E. Allaire, "Design of Nonlinear Squeeze Film Dampers for Aircraft Engines," Journal of Lubrication Technology, Trans. ASME, Vol. 99, No. 1, pp. 57-64, 1977 https://doi.org/10.1115/1.3452990
- Feder, E., P. N. Bansal, and A. Blanco, "Investigation of Squeeze Film Damper Forces Produced by Circular Centered Orbits," Journal of Engineering for Power, Trans. ASME, Vol. 100, pp. 15-21, 1978 https://doi.org/10.1115/1.3446313
- Marmol, R. A. and J. M. Vance, "Squeeze Film Damper Characteristics for Gas Turbine Engines", Journal of Mechanical Design, Trans. ASME, Vol. 100, pp. 139-146, 1978 https://doi.org/10.1115/1.3453878
- Tichy, J. A., "A Study of the Effect of Fluid Inertia and End Leakage in the Finite Squeeze Film Damper," ASME paper 86-Trib-62, 1986
- San Andres, L. A. and J. M. Vance, "Effects of Fluid Inertia and Turbulence on the Force Coefficients for Squeeze Film Dampers," Journal of Engineering for Gas Turbine and Power, Trans. ASME, Vol. 108, No. 2, pp. 332-339, April 1986 https://doi.org/10.1115/1.3239908
- Pan, C. H. T., "An Improved Short Bearing Analysis for the Submerged Operation of Plain Journal Bearings and Squeeze Film Dampers," J. of Lubrication Technology, Vol. 102, pp. 320-332, July 1980 https://doi.org/10.1115/1.3251526
- Zeidan, F. and Vance, J. M., "Cavitation Leading to a Two Phase Fluid in a Squeeze Film Damper," STLE Tribology Transactions, Vol. 32, No. 1, pp. 100-104, 1989 https://doi.org/10.1080/10402008908981868
- Ku, C. P. and Tichy, J. A., "An Experimental and Theoretical Study of Cavitation on a Finite Submerged Squeeze Film Dampers," ASME J. of Tribology, Vol. 112, pp. 725-733, 1990 https://doi.org/10.1115/1.2920321
- Jung. S. Y. and Vance, J. M., "Effects of Vapor Cavitation and Fluid Inertia on the Force Coefficients of a Squeeze Film Damper Part I; Analysis of a Long SFD," STLE Tribology Transactions, Vol. 36, No. 4, pp. 579-604, 1993
- Jung. S. Y. and Choi, S. B., "Analysis of a Short Squeeze Film Damper Operating with Electrorheological Fluid," STLE Tribology Transactions, Vol. 38, pp. 857-862, 1995 https://doi.org/10.1080/10402009508983480
- de Santiago, O., San Andres, L., and Oliveras, J. "Imbalance Response of a Rotor Supported on Open- Ends Integral Squeeze Film Dampers," ASME J. Eng. for Gas Turbines and Power, Vol. 121, pp. 718- 721, 1999 https://doi.org/10.1115/1.2818532
Cited by
- 회전체 동역학 및 트라이볼로지 요소의 연구동향 vol.12, pp.1, 2009, https://doi.org/10.5293/kfma.2009.12.1.076