Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Theoretical research of Static Characteristics of Bump Floating Ring Seal

범프 플로팅 링 실의 정특성에 대한 해석적 연구

  • Published : 2008.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The floating ring seal which is used in the high pressure turbo pump is frequently used in the oxidizer pump and the fuel pump of the turbo pump of the liquid propulsion rocket, because it is able to minimize clearance to decrease the leakage flow rate. But, the floating ring seal has a tendency to increase instability in decreasing eccentricity ratio. To complement this weakness, it is devised bump floating ring seal which is inserted bump in the outer surface. It has various experiment results. But the theoretical study of the bump floating ring seal didn't investigated yet. In this paper, we analyse about static characteristics of bump floating ring seal, compared previous experimental results. To analyze the characteristic of bump floating ring seal, we coupled perturbation method of floating ring seal and FEM of bump foil.

Keywords

References

  1. Lee, Y. B., Shin, S. K., Ryn, K., Kim, C. H, Jang, Gunhee, "Test Results for Leakage and Rotordynamic Coefficients of Floating Ring Seal in a High Pressure, High Speed Turbopump", ASME/STLE International Joint Tribology Conference, Oct., 2004
  2. 이용복, "범프 포일을 장착한 고압 터보 펌프용 플로팅 링 실의 실험에 관한 연구", 한국윤활학회지, 제22권, 제2호 pp. 105-111, 2006
  3. 박동진, "틸팅 현상을 고려한 범프 포일 스러스트 베어링의 특성 해석에 관한 연구", 한양대학교 석사 학위논문, 2007
  4. Childs, D. W., "Dynamic Analysis of Turbulent Annular Seals Based on Hirs Lubrication Equation", ASME Journal of Lubrication Technology, Vol. 105, pp. 429-436, 1983 https://doi.org/10.1115/1.3254633
  5. Childs, D. W., "Finite Length Solutions for Rotordynamic Coefficients of Turbulent Annular Seals", ASME Journal of Lubrication Technology, Vol. 105, pp. 437-444, 1983 https://doi.org/10.1115/1.3254636
  6. Nelson, C. and Nguyen, B., "Comparison of Hirs'Equation with Moody's Equation for Determining Rotordynamic Coefficients of Annular Pressure Seals", ASME Journal of Tribology, Vol.109, pp. 144-148, 1987 https://doi.org/10.1115/1.3261306
  7. Nelson, C., and Nguyen, B., "Analysis of Eccentric Annular Seals: Part I-A New Solution Using Fast Fourier Transforms for Determining Hydrodynamic Force", ASME Journal of Tribology, Vol. 110, pp. 355-366, 1988
  8. Nelson, C. and Nguyen, B., "Analysis of Eccentric Annular Seals: Part II-Effects of Eccentricity on Rotordynamic Coefficients", ASME Journal of Tribology, Vol. 110, pp. 361-366, 1988 https://doi.org/10.1115/1.3261634

Cited by

  1. 회전체 동역학 및 트라이볼로지 요소의 연구동향 vol.12, pp.1, 2009, https://doi.org/10.5293/kfma.2009.12.1.076