DOI QR코드

DOI QR Code

용접형 판형열교환기의 열전달 및 압력강하특성에 관한 수치해석

A Numerical Analysis on the Heat Transfer and Pressure Drop Characteristics of Welding Type Plate Heat Exchangers

  • 정종윤 (경희대학교 대학원 기계공학과) ;
  • 남상철 (LS 전선(주) 기계연구소) ;
  • 강용태 (경희대학교 기계산업시스템공학부)
  • 발행 : 2008.09.01

초록

Numerical analysis was carried out to examine the heat transfer and pressure drop characteristics of plate heat exchangers for absorption application using Computational Fluid Dynamics(CFD) technique. A commercial CFD software package, FLUENT was used to predict the characteristics of heat transfer, pressure drop and flow distribution within plate heat exchangers. In this paper, a welded plate heat exchanger with the plate of chevron embossing type was numerically analyzed by controlling mass flow rate, solution concentration, and inlet temperatures. The working fluid is $H_2O$/LiBr solution with the LiBr concentration of 50-60% in mass. The numerical simulation shows reasonably good agreement with the experimental results. Also, the numerical results show that plate of the chevron shape gives better results than plate of the elliptical shape from the view points of heat transfer and pressure drop. These results provide a guideline to apply the welded PHE for the solution heat exchanger of absorption systems.

키워드

참고문헌

  1. Kim, G. S., Chung, B. C., Kim, H. Y., Cheon, H. J. and Kim, S. I., 2007, "Introduction of High Efficiency Absorption Chiller-heater," Proceedings of the SAREK Summer Annual Conference, pp. 371-376
  2. Sommerfeld. M., and Ho. C. A., 2003, "Numerical Calculation of Particle Transport in Turbulent Wall Bounded Flows," Powder Technology, Vol. 131, pp. 1-6 https://doi.org/10.1016/S0032-5910(02)00293-0
  3. Bogaert, R. and Boles, A., 1995, "Global Performance of a Prototype Brazed Plate Heat Exchanger in a Large Reynolds Number Range," Swiss Federal Institute of Technology, EPFL-LTT, Lausanne, Switzerland, Experimental Heat Transfer, Vol. 8, pp. 293-311 https://doi.org/10.1080/08916159508946508
  4. Stasiek, J., Collins, M. W., Clofalo, M. and Chew, P. E., 1996, "Investigation of Flow and Heat Transfer in Corrugated Passages -I Experimental Results," Int. J. Heat Mass Transfer, Vol.30, No1, pp. 149-164 https://doi.org/10.1016/S0017-9310(96)85013-7
  5. Hinze, J. O., 1975, "Turbulence," McGraw-Hill Publishing Co., New York
  6. Versteeg, H. K. and Malalasekera, W., J., 1999, “An Introduction to Computational Fluid Dynamics.-The Finite Volume Method," Longman Group Ltd., pp. 146-150

피인용 문헌

  1. Performance Evaluation of Plate Heat Exchanger with Chevron Angle Variations vol.33, pp.7, 2009, https://doi.org/10.3795/KSME-B.2009.33.7.520
  2. Numerical Simulation of the Fully Developed Flow and Heat Transfer of a Plate Heat Exchanger Taking into Account Variation in the Corrugation Height vol.36, pp.1, 2012, https://doi.org/10.3795/KSME-B.2012.36.1.001