Journal of the Korean Society of Industry Convergence (한국산업융합학회 논문집)
- Volume 11 Issue 2
- /
- Pages.59-64
- /
- 2008
- /
- 1226-833X(pISSN)
- /
- 2765-5415(eISSN)
Design of 2 Axles Fatigue Test JIG for the Materialization of Mixed Mode (Mode I+II)
혼합모드(Mode I+II)구현을 위한 2축 피로시험 JIG 설계
- Choi, Seong-Dae (Mechanical Engineering Dept. of Kumoh Institute of Technology) ;
- Cheong, Seon-Hwan (Mechanical Engineering Dept. of Kumoh Institute of Technology) ;
- Kim, Gi-Man (Mechanical Engineering Dept. of Kumoh Institute of Technology) ;
- Kim, Jam-Kyu (Mechanical Engineering Dept. of Kumoh Institute of Technology) ;
- Choi, Myoung-Su (Graduate School of Kumoh Institute of Technology) ;
- Kim, Woo-Jae (Graduate School of Kumoh Institute of Technology)
- 최성대 (금오공과대학교 기계공학부) ;
- 정선환 (금오공과대학교 기계공학부) ;
- 김기만 (금오공과대학교 기계공학부) ;
- 김잠규 (금오공과대학교 기계공학부) ;
- 최명수 (금오공과대학교 대학원) ;
- 김우재 (금오공과대학교 대학원)
- Received : 2008.01.25
- Accepted : 2008.05.23
- Published : 2008.05.31
Abstract
Elements of a mechanical structure are getting from multi-axles stress. so fatigue characteristic experiment Shall execute in multi-axles stress state. it is very hard to apply according to forms of a testing machine and implementation. In this study, 2 axles fatigue testing machine did a design and Development. a new JIG developed to realize a mixed mode. a stress state in mixed mode of a specimen had each other comparison using the Finite element method to examine propriety of a new JIG.