참고문헌
- T. Mori, K. Tanaka, T. Inomata, A. Takeda, and M. Kogoma, "Development of silica. coating methods for powdered pigments with atmospheric pressure glow plasma", Thin Solid Films, Vol. 316, p. 89, 1998 https://doi.org/10.1016/S0040-6090(98)00395-2
- W. Xue, X. Liu, X. Zheng, and C. Ding, "Plasma sprayed diopside coatings for biomedical applications", Surf. Coat. Technol., Vol. 185, p. 340, 2004 https://doi.org/10.1016/j.surfcoat.2003.12.018
- T. Sato, K. Fujioka, R. Ramasamy, T. Urayama, and S. Fujii, "Sterilization efficacy of a coaxial microwave plasma flow at atmospheric pressure", IEEE Trans. Industry Appl., Vol. 42, p. 399, 2006 https://doi.org/10.1109/TIA.2006.870039
- Y. Akimune, K. Matsuo, S. Sodeoka, T. Sugiyama, and S. Shimizu, "Point load-induced. fracture behavior in zirconia plasma spray coating", Ceramics international, Vol. 30, p. 2251, 2004 https://doi.org/10.1016/j.ceramint.2003.12.008
- M. Kogoma and S. Okazaki, "Raising of ozone formation efficiency in a homogeneous glow discharge plasma at atmospheric pressure", J. Phys. D: Appl. Phys., Vol. 27, p. 1985, 1994 https://doi.org/10.1088/0022-3727/27/9/026
- R. Prat, Y. J. Koh, Y. Babukutty, M. Kogoma, S. Okazaki, and M. Kodama, "Polymer deposition using atmospheric pressure plasma glow (APG) discharge", Polymer, Vol. 41, p. 7355, 2000 https://doi.org/10.1016/S0032-3861(00)00103-8
- Y. M. Sung and T. Sakoda, "Optimum conditions for ozone formation in a micro dielectric barrier discharge", Surf. Coat. Technol., Vol. 197, p. 148, 2005 https://doi.org/10.1016/j.surfcoat.2004.09.031
- F. Massines and G. Gouda, "A comparison of polypropylene-surface treatment by filamentary, homogeneous and glow discharges in helium at atmospheric pressure", J. Phys. D: Appl. Phys., Vol. 31, p. 3411, 1998 https://doi.org/10.1088/0022-3727/31/24/003
- J.-K. Park, W.-T. Ju, K.-H. Paek, Y.-H. Kim, Y.-H. Choi, and J.-H. Kim, "Pre-treatments of polymers by atmospheric pressure ejected plasma for adhesion improvement", Surf. Coat. Technol., Vol. 174-175, p. 547, 2003 https://doi.org/10.1016/S0257-8972(03)00689-3
-
T. Yuji and Y. M. Sung, "Surface treatment of
$TiO_2$ films by pulse plasma for dye-sensitized solar cells application", IEEE Trans. Plasma Sci., Vol. 35, p. 1010, 2007 https://doi.org/10.1109/TPS.2007.896918 - R. Dorai and M. J. Kushner, "Effect of multiple pulses on the plasma chemistry during the remediation of NOx using dielectric barrier discharges", J. Phys. D: Appl. Phys., Vol. 36, p. 666, 2003 https://doi.org/10.1088/0022-3727/36/6/309
- J. Vlček, "A collisional-radiative model applicable to argon discharges over a wide range of conditions. I. Formulation and basic data", J. Phys. D: Appl. Phys., Vol. 22, p. 623, 1989 https://doi.org/10.1088/0022-3727/22/5/009
- O. Goossens, E. Dekempeneer, D. Vangeneugden, R. Van de Leest, and C. Leys, "Increasing the hydrophobicity of a PP film using a helium/CF4 DBD treatment at atmospheric pressure", Surf. Coat. Technol., Vol. 142-144, p. 474, 2001 https://doi.org/10.1016/S0257-8972(01)01140-9
- S. Koike, T. Sakamoto, H. Kobori, H. Matsuura, and H. Akatsuka, "Spectroscopic study on vibrational nonequlibrium of a microwave discharge nitrogen plasma", Jpn. J. Appl. Phys., Vol. 43, p. 5550, 2004 https://doi.org/10.1143/JJAP.43.5550