Journal of Advanced Marine Engineering and Technology

  • 제32권4호
  • /
  • Pages.596-602
  • /
  • 2008
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

전기 추진 시스템의 냉각시스템에 관한 분석 및 설계

Analysis & Design of Cooling System for Electric Propulsion System

  • 발행 : 2008.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The cooling system is one of the most concerning factor for the reliability of the electric propulsion ship. Generally, a drive system operation in higher temperature decreases the device's reliability and power efficiency. The management of power loss and temperature of switching devices is indispensable for the reliability of the power electric system. In this paper, the switching devices are molded by IGBT, and the propulsion system is consisted of MIIR(Motor with Inverter Internal to Rotor). The system composition interacts with each other to calculate the loss and temperature of device. The calculation result is used for modeling and designing of the control and monitoring system for the electric propulsion system.

키워드

참고문헌

  1. 'Baseline Prime Power System Used by the University of Texas', UT-CEM report, 2003
  2. Dr. Douglas J. Nelson, chair, Dr. Charles F. Reinholtz, member, Dr. Michael W. Ellis, member, 'Thermal Overload Capabilities of an Electric Motor and Inverter Unit Through Modeling Validated by Testing', MASTER OF SCIENCE in Mechanical Engineering, page 10, 2004
  3. Jos Miguel Ortiz-Rodruez, 'ELECTRO- THERMAL MODELING OF A POWER ELECTRONIC MODULE', degree of MASTER OF SCIENCE in ELECTRICAL ENGINEERING UNIVERSITY OF PUERTO RICO MAYAGZ CAMPUS, 2004
  4. J. Sigg, P. Tkes, R. Kraus, 'Parameter Extraction Methodology and Validation for an Electro-Thermal Physics-Based NPT IGBT Model', IEEE Industry Applications Society,page 5, 1997
  5. L. C. Jenkins, 'Electronic equipment thermal management', Reliability and Maintainability Symposium, Proceedings. Annual, pp. 17-22, 1984
  6. H. Vinke and C. J. Clemens, 'Compact models for accurate thermal characterization of electronic parts', IEEE Transactions on Components, Packaging and Manufacturing Technology, Part A, Vol. 20, No. 4, pp. 411-419, Sept 1997 https://doi.org/10.1109/95.650930
  7. A. R. Hefner and D. L. Blackburn, 'Thermal component models for electrothermal networks simulation', IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 17, pp. 413-424, 1994 https://doi.org/10.1109/95.311751

피인용 문헌

  1. HILS 기반의 수중체 냉각 시스템 개선 vol.49, pp.5, 2008, https://doi.org/10.3744/snak.2012.49.5.376