Journal of Advanced Marine Engineering and Technology

  • 제32권4호
  • /
  • Pages.514-521
  • /
  • 2008
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

구리합금 나노분말을 혼합한 윤활제가 디젤기관의 축계안정성 및 토크에 미치는 영향

The Effect of Lubricant Containing Copper Alloy Nano-powder on Shafting Stability and Torque of a Diesel Engine

  • 발행 : 2008.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Many research works for improving a boundary lubrication performance have been executed by using solid lubricants, and been tried to apply an engine lubrication. However those general lubricants have not been applied on engines due to the extreme conditions such as very high temperature and pressure during combustion process in a cylinder. In this study a lubricant containing copper alloy nano-powder is applied on a diesel engine driven by an electric motor. Torques and shaft vibrations are measured, then an engine friction loss and rotating stability are assessed. The results show that the frequency of the vibration is about the same as that of a general lubricant, but the amplitudes in the both X and Y direction are reduced as well as the friction loss is reduced.

키워드

참고문헌

  1. W.J. Bartz, J. Oppelt,'Lubricating Effectiveness of Oil-Soluble Additives and Molibdenum Disulfide Dispersed in Mineral Oil, ' Lubr. Eng.,Vol.36, pp.579-585, 1980
  2. G.F. Reick, 'Energy-Saving Lubricants Containing Colloidal PTFE, ' Lubr.Eng., Vol.38, pp.635-645, 1982
  3. C. Cusano and H.E. Sliney, 'Dynamics of Solid Dispersions in Oil During the Lubrication of point Contacts, partI-Graphite, 'ASLE Trans.,Vol.25, No.2, pp.183-189, 1982 https://doi.org/10.1080/05698198208983079
  4. Jen Fin Lin, Ming Guu Shih, Yih Wei Chen, 'The tribological performance of 6061 aluminum alloy/graphite composite materials In oil lubrications with EP additives', Wear Vol.198, pp.58-70, 1996 https://doi.org/10.1016/0043-1648(96)06932-3
  5. T. Hisakado T. Tsukizoe H. Yoshikawa, 'Lubrication Mechanism of Solid Lubricants in Oils', Journal of Lubrication Technology APRIL, Vol.105, 1983
  6. B.K. Gupta and B. Bhushan, 'Fullerene Particles as an Additive to Liquid Lubricants and Greases for Low Friction and Wear, ', Lubr. Eng., Vol.52, pp.524-528, 1994
  7. T. Spalvins, 'A review of recent advances in solid film lubrication', American Vacuum Society J., Mar/Apr 1987
  8. A.S. Kuzharov and O.V. Fisenko, 'Copper Containing Additives and Tribological Behavior of Chiatim-201 Grease, ' Soviet Jr. of Friction and Wear, Vol.13, pp.73-77, 1992
  9. T.I. Nazarenko, N.N. Lozentsova, G.G. Shchegolov and Yu.P.Toporov,' On Lubricating Properties of Oil with Copper-Containing Additives', Soviet Jr.of Friction and Wear, Vol.13, No.2, pp.78-81, 1992
  10. S. Gunsel and F. Lockwood, 'The Influence of Copper-Containing Additives on Oil Oxidation and Corrosion,' Tribology Trans.(STLE), Vol.38, No.3, pp.485-496, 1995 https://doi.org/10.1080/10402009508983434
  11. M.V. Astakhov and V.A. Mouratov, 'Nickel Fine Particle's Adsorptive Catalytic Mechanism,' Wear, Vol.176, pp.61-65, 1994 https://doi.org/10.1016/0043-1648(94)90197-X
  12. Yun Xin Wu, Fuxing Wang, Yinqian Cheng, Nanping Chen, 'A study of the optimization mechanism of solid lubricant concentration in Ni/MoS2', Self-lubricant in composite Wear, 205, pp.64-70, 1997
  13. G.P. Shpenkov, Physical Chemistry of Friction, Minsk, in Russian, 1991
  14. 안효석, 이성철, '첨가제에 함유된 미세한 구리합금입자의 마찰 및 마모 특성,' 한국윤활학회지, 제12권 제2호, pp.32-40, 1996

피인용 문헌

  1. The effect of lubricant containing diamond nano-powder on performance vol.38, pp.9, 2014, https://doi.org/10.5916/jkosme.2014.38.9.1039