DOI QR코드

DOI QR Code

Ellipsoidal bounds for static response of framed structures against interactive uncertainties

  • Kanno, Yoshihiro (Department of Mathematical Informatics, University of Tokyo) ;
  • Takewaki, Izuru (Department of Urban and Environmental Engineering, Kyoto University)
  • 투고 : 2007.04.13
  • 심사 : 2007.11.05
  • 발행 : 2008.03.25

초록

This paper presents an optimization-based method for computing a minimal bounding ellipsoid that contains the set of static responses of an uncertain braced frame. Based on a non-stochastic modeling of uncertainty, we assume that the parameters both of brace stiffnesses and external forces are uncertain but bounded. A brace member represents the sum of the stiffness of the actual brace and the contributions of some non-structural elements, and hence we assume that the axial stiffness of each brace is uncertain. By using the $\mathcal{S}$-lemma, we formulate a semidefinite programming (SDP) problem which provides an outer approximation of the minimal bounding ellipsoid. The minimum bounding ellipsoids are computed for a braced frame under several uncertain circumstances.

키워드

참고문헌

  1. Alefeld, G. and Mayer, G. (2000), "Interval analysis: theory and applications", Journal of Computational and Applied Mathematics, 121, 421-464. https://doi.org/10.1016/S0377-0427(00)00342-3
  2. Ben-Haim, Y. (2006), Information-gap Decision Theory: Decisions under Severe Uncertainty, (2nd ed.), Academic Press, London, UK.
  3. Ben-Haim, Y. and Elishakoff, I. (1990), Convex Models of Uncertainty in Applied Mechanics, Elsevier, New York, NY.
  4. Ben-Tal, A., El Ghaoui, L. and Nemirovski, A. (2000), Robustness, in: Handbook of Semidefinite Programming - Theory, Algorithms, and Applications, Wolkowicz, H., Saigal, R. and Vandenberghe, L. (eds.), Kluwer, Dordrecht, the Netherlands, pp. 139-162.
  5. Ben-Tal, A. and Nemirovski, A. (2001), Lectures on Modern Convex Optimization: Analysis, Algorithms, and Engineering Applications, SIAM, Philadelphia, PA.
  6. Calafiore, G. and El Ghaoui, L. (2004), "Ellipsoidal bounds for uncertain linear equations and dynamical systems", Automatica, 40, 773-787. https://doi.org/10.1016/j.automatica.2004.01.001
  7. Chen, S., Lian, H. and Yang, X. (2002), "Interval static displacement analysis for structures with interval parameters", International Journal for Numerical Methods in Engineering, 53, 393-407. https://doi.org/10.1002/nme.281
  8. Helmberg, C. (2002), "Semidefinite programming", European Journal of Operational Research, 137, 461-482. https://doi.org/10.1016/S0377-2217(01)00143-6
  9. Kanno, Y. and Takewaki, I. (2006), "Robustness analysis of trusses with separable load and structural uncertainties", International Journal of Solids and Structures, 43, 2646-2669. https://doi.org/10.1016/j.ijsolstr.2005.06.088
  10. Kanno, Y. and Takewaki, I. (2006), "Confidence ellipsoids for static response of trusses with load and structural uncertainties", Computer Methods in Applied Mechanics and Engineering, 196, 393-403. https://doi.org/10.1016/j.cma.2006.04.007
  11. McWilliam, S. (2001), "Anti-optimization of uncertain structures using interval analysis", Computers & Structures, 79, 421-430. https://doi.org/10.1016/S0045-7949(00)00143-7
  12. Muhanna, R.L. and Mullen, R.L. (2001), "Uncertainty in mechanics problems-interval-based approach", Journal of Engineering Mechanics (ASCE), 127, 557-566. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:6(557)
  13. Ohsaki, M., Fujisawa, K., Katoh, N. and Kanno, Y. (1999), "Semi-definite programming for topology optimization of truss under multiple eigenvalue constraints", Computer Methods in Applied Mechanics and Engineering, 180, 203-217. https://doi.org/10.1016/S0045-7825(99)00056-0
  14. Pantelides, C.P. and Ganzerli, S. (1989), "Design of trusses under uncertain loads using convex models", Journal of Structural Engineering (ASCE), 124, 318-329.
  15. Qiu, Z. (2003), "Comparison of static response of structures using convex models and interval analysis method", International Journal for Numerical Methods in Engineering, 56, 1735-1753. https://doi.org/10.1002/nme.636
  16. Qiu, Z. and Elishakoff, I. (1998), "Antioptimization of structures with large uncertain-but-non-random parameters via interval analysis", Computer Methods in Applied Mechanics and Engineering, 152, 361-372. https://doi.org/10.1016/S0045-7825(96)01211-X
  17. Rohn, J. (1997), "Overestimations in bounding solutions of perturbed linear equations", Linear Algebra and its Applications, 262, 55-65. https://doi.org/10.1016/S0024-3795(97)80022-5
  18. Sturm, J.F. (1999), "Using SeDuMi 1.02, a MATLAB toolbox for optimization over symmetric cones", Optimization Methods and Software, 11/12, 625-653.
  19. Takewaki, I. and Ben-Haim, Y. (2005), "Info-gap robust design with load and model uncertainties", Journal of Sound and Vibration, 288, 551-570. https://doi.org/10.1016/j.jsv.2005.07.005
  20. Using MATLAB (2002), The MathWorks, Inc., Natick, MA.

피인용 문헌

  1. Semidefinite programming for dynamic steady-state analysis of structures under uncertain harmonic loads vol.198, pp.41-44, 2009, https://doi.org/10.1016/j.cma.2009.06.005