Smart Structures and Systems

  • 제4권6호
  • /
  • Pages.759-777
  • /
  • 2008
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Real-time structural damage detection using wireless sensing and monitoring system

  • Lu, Kung-Chun (National Taiwan University) ;
  • Loh, Chin-Hsiung (National Taiwan University) ;
  • Yang, Yuan-Sen (National Center for Research on Earthquake Engineering) ;
  • Lynch, Jerome P. (Department of Civil & Environmental Engineering, University of Michigan) ;
  • Law, K.H. (Department of Civil & Environmental Engineering, Stanford University)
  • 투고 : 2007.05.12
  • 심사 : 2008.01.30
  • 발행 : 2008.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

A wireless sensing system is designed for application to structural monitoring and damage detection applications. Embedded in the wireless monitoring module is a two-tier prediction model, the auto-regressive (AR) and the autoregressive model with exogenous inputs (ARX), used to obtain damage sensitive features of a structure. To validate the performance of the proposed wireless monitoring and damage detection system, two near full scale single-story RC-frames, with and without brick wall system, are instrumented with the wireless monitoring system for real time damage detection during shaking table tests. White noise and seismic ground motion records are applied to the base of the structure using a shaking table. Pattern classification methods are then adopted to classify the structure as damaged or undamaged using time series coefficients as entities of a damage-sensitive feature vector. The demonstration of the damage detection methodology is shown to be capable of identifying damage using a wireless structural monitoring system. The accuracy and sensitivity of the MEMS-based wireless sensors employed are also verified through comparison to data recorded using a traditional wired monitoring system.

키워드

참고문헌

  1. Lei, Y., Kiremidjian, A. S., Nair, K. K., Lynch, J. P. and Law, K. H. (2005), "Algorithms for time synchronization of wireless structural monitoring sensors", Earthq. Eng. Struct. Dyn. 34, 555-573. https://doi.org/10.1002/eqe.432
  2. Wang, Y., Lynch, J. P. and Law, K. H. (2005), "A wireless structural health monitoring system with multithreaded sensing devices: design and validation", Structural Infrastr. Eng., in press.
  3. Doebling, S. W., Farr, C. R., Prime, M. B., and Shevitz, D. W. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review", Los Alamos National Laboratory, Tech. Rep., May.
  4. Kondo, I. and Hamamoto, T. (1996), "Seismic damage detection of multi-story building using vibration monitoring", Eleventh World Conference on Earthquake Engineering, Paper No. 988.
  5. Safak, E. (1989), "Adaptive modeling, identification, and control of dynamic structural systems: I - Theory", J. Eng. Mech., ASCE, 115(11), 2386-2405. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:11(2386)
  6. Safak, E. (1989), "Adaptive modeling, identification, and control of dynamic structural systems: II - Application", J. Eng. Mech., ASCE, 115(11), 2406-2426. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:11(2406)
  7. Andersson, P. (1985), "Adaptive forgetting in recursive identification through multiple models", Int. J. Control, 42(5), 1175-1193. https://doi.org/10.1080/00207178508933420
  8. Loh, C. H. and Lin, H. M. (1996), "Application of off line and on line identification techniques to building seismic response data", Earthq. Eng. Struct. Dyn., 25(3), 269-290. https://doi.org/10.1002/(SICI)1096-9845(199603)25:3<269::AID-EQE554>3.0.CO;2-J
  9. Sohn, H., Farrar, C. R., Hunter, N. And Worden, K. (2001), "Applying the LANL statistical pattern recognition paradigm for structural health monitoring to data from a surface-effect fast patrol boat", Los Alamos National Laboratory Report No. LA-13761-MS, University of California, Los Alamos, NM.
  10. Sohn, H. and Farrar, C. R. (2001), "Damage diagnosis using time series analysis of vibration signals", Smart Mater. Struct., 10, 446-451. https://doi.org/10.1088/0964-1726/10/3/304
  11. Lynch, J. P., Sundararajan, A., Law, K. H., Kiremidjian, A. S. and Carryer, E. (2004), "Embedding damage detection algorithms in a wireless sensing unit for attainment of operational power efficiency", Smart Mater. Struct., 13(4), 800-810. https://doi.org/10.1088/0964-1726/13/4/018
  12. Lei, Y., Kiremidjian, A. S., Nair, K. K., Lynch, J. P., Law, K. H., Kenny, T. W., Carryer, E., and Kottapalli, A. (2003), "Statistical damage detection using time series analysis on a structural health monitoring benchmark problem", Proc. 9th International conference on Application of Statistics and Probability in Civil engineering ICAPS-9, San Francisco, US.
  13. Lynch, J. P., Wang, Y, Lu, K. C., Hou, T. C. and Loh, C. H. (2006), "Post-seismic damage assessment of steel structures instrumented with self-interrogating wireless sensors", Proc. of the 8-th U.S. National Conf. on Earthquake Engineering, paper No. 1390, San Francisco, US, April.
  14. Wang, Y., Swartz, R. A., Lynch, J. P., Law, K. H., Lu, K. C., Loh, C. H. (2007), "Decentralized civil structural control using real-time wireless sensing and embedded computing", Smart Struct. Sys., 3(3), 321-340. https://doi.org/10.12989/sss.2007.3.3.321
  15. Lynch, J. P., Sundararajian, A., Law, K. H. and Kiremidjian, A. S., Kenny, (2002), Thomas and Carryer, Ed, "Computational core design of a wireless structural health monitoring system", Proceedings of Advances in Structural Engineering and Mechanics (ASEM'02), Pusan, Korea, August 21-23.
  16. McKenna, F. and Fenves, G. L. (2000), "An object-oriented software design for parallel structural analysis", Proceedings of Advanced Technology in Structural Engineering, Structures Congress 2000, Philadelphia, Pennsylvania, USA, May 8-10. (Software available at http://opensees. berkeley.edu/).
  17. Corbin, M., Hera, A. and Hou, Z. (2000), "Locating damages using wavelet approach", Proc. 14th Engineering Mechanics Conf. (EM2000), (CD Rom), Austin, TX.
  18. Hou, Z., Noori, M. and St. Amand, R. (2000), "Wavelet-based approach for structural damage detection", ASCE, J. Eng. Mech. Div., Am. Soc. Civ. Eng., 12(7), 677-683.
  19. Yen, Gary G. and Lin, Kuo-Chung, (2000), "Wavelet packet feature extraction for vibration monitoring", IEEE, 47(3), 650-667.
  20. Sun, Z. and Chang, C. C. (2002), "Structural damage assessment based on wavelet packet transform", ASCE, J. Struct. Eng., 128(10), 1354-1361.
  21. Yang, J. N., Lin, S., Huang, H. and Zhou, L. (2006), "An adaptive extended kalman filter for structural damage identification", Struct. Control Health Monitoring, 13, 849-867. https://doi.org/10.1002/stc.84
  22. Yang, J. N., Lin, S. and Zhou, L. (2004), "Identification of parametric changes for civil engineering structures using an adaptive kalman filter", Smart Struct. Mater., 5391, 389-399.
  23. Huang, S.-K., Loh, C.-H., Liao, W. I. and Yang, J. N. (2008), "On-line tracking techniques of structural parameters based on adaptive Kalman filter algorithm", submitted.

피인용 문헌

  1. Optimal selection of autoregressive model coefficients for early damage detectability with an application to wind turbine blades vol.70-71, 2016, https://doi.org/10.1016/j.ymssp.2015.09.007
  2. Sequential projection pursuit for optimised vibration-based damage detection in an experimental wind turbine blade vol.27, pp.2, 2018, https://doi.org/10.1088/1361-665X/aa9f8e
  3. Multiscale Acceleration-Dynamic Strain-Impedance Sensor System for Structural Health Monitoring vol.8, pp.10, 2012, https://doi.org/10.1155/2012/709208
  4. Damage localization using a power-efficient distributed on-board signal processing algorithm in a wireless sensor network vol.21, pp.2, 2012, https://doi.org/10.1088/0964-1726/21/2/025005
  5. Wavelet-based AR–SVM for health monitoring of smart structures vol.22, pp.1, 2013, https://doi.org/10.1088/0964-1726/22/1/015003
  6. Estimating Cumulative Distribution Functions with Maximum Likelihood to Sample Data Sets of a Sea Floater Model vol.37, pp.5, 2013, https://doi.org/10.5394/KINPR.2013.37.5.453
  7. Signal Processing Techniques for Vibration-Based Health Monitoring of Smart Structures vol.23, pp.1, 2016, https://doi.org/10.1007/s11831-014-9135-7
  8. Structural health monitoring using DOG multi-scale space: an approach for analyzing damage characteristics vol.27, pp.3, 2018, https://doi.org/10.1088/1361-665X/aaa7ff
  9. Improved damage detectability in a wind turbine blade by optimal selection of vibration signal correlation coefficients vol.15, pp.6, 2016, https://doi.org/10.1177/1475921716657016
  10. A damage detection algorithm integrated with a wireless sensing system vol.305, 2011, https://doi.org/10.1088/1742-6596/305/1/012042
  11. Nonlinear multiclass support vector machine–based health monitoring system for buildings employing magnetorheological dampers vol.25, pp.12, 2014, https://doi.org/10.1177/1045389X13507343
  12. Repetitive model refinement for structural health monitoring using efficient Akaike information criterion vol.15, pp.5, 2015, https://doi.org/10.12989/sss.2015.15.5.1329
  13. Health monitoring of a steel moment-resisting frame subjected to seismic loads vol.140, 2018, https://doi.org/10.1016/j.jcsr.2017.10.023
  14. A Computationally Efficient Algorithm for Real-Time Tracking the Abrupt Stiffness Degradations of Structural Elements vol.31, pp.6, 2016, https://doi.org/10.1111/mice.12217
  15. Probability Based Risk Evaluation Techniques for the Small-Sized Sea Floater vol.36, pp.10, 2012, https://doi.org/10.5394/KINPR.2012.36.10.795
  16. Chaos in the fractionally damped broadband piezoelectric energy generator vol.80, pp.4, 2015, https://doi.org/10.1007/s11071-014-1320-6
  17. On-line structural damage localization and quantification using wireless sensors vol.20, pp.10, 2011, https://doi.org/10.1088/0964-1726/20/10/105025
  18. Real-time substructural identification by boundary force modeling vol.25, pp.5, 2018, https://doi.org/10.1002/stc.2151
  19. Wireless sensor networks for long-term structural health monitoring vol.6, pp.3, 2008, https://doi.org/10.12989/sss.2010.6.3.263
  20. Finite element model updating of Kömürhan highway bridge based on experimental measurements vol.6, pp.4, 2008, https://doi.org/10.12989/sss.2010.6.4.373
  21. Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements vol.6, pp.5, 2008, https://doi.org/10.12989/sss.2010.6.5_6.711
  22. A wireless guided wave excitation technique based on laser and optoelectronics vol.6, pp.5, 2008, https://doi.org/10.12989/sss.2010.6.5_6.749
  23. Design of wireless sensor network and its application for structural health monitoring of cable-stayed bridge vol.6, pp.8, 2008, https://doi.org/10.12989/sss.2010.6.8.939
  24. Output-only modal identification approach for time-unsynchronized signals from decentralized wireless sensor network for linear structural systems vol.7, pp.1, 2011, https://doi.org/10.12989/sss.2011.7.1.059
  25. Bio-inspired neuro-symbolic approach to diagnostics of structures vol.7, pp.3, 2008, https://doi.org/10.12989/sss.2011.7.3.229
  26. Emergent damage pattern recognition using immune network theory vol.8, pp.1, 2011, https://doi.org/10.12989/sss.2011.8.1.069
  27. Nonlinear Dynamic Characteristics of Variable Inclination Magnetically Coupled Piezoelectric Energy Harvesters vol.137, pp.2, 2008, https://doi.org/10.1115/1.4029076
  28. Nonlinear damage detection using linear ARMA models with classification algorithms vol.26, pp.1, 2008, https://doi.org/10.12989/sss.2020.26.1.023